首页 | 本学科首页   官方微博 | 高级检索  
     检索      

8:2氟调聚醇(8:2FTOH)厌氧生物降解特性
引用本文:李飞,陈轶丹,杨志敏,黄华山,周真明,苑宝玲.8:2氟调聚醇(8:2FTOH)厌氧生物降解特性[J].中国环境科学,2016,36(11):3295-3303.
作者姓名:李飞  陈轶丹  杨志敏  黄华山  周真明  苑宝玲
作者单位:华侨大学土木工程学院, 福建 厦门 361021
基金项目:国家自然科学基金资助项目(51278206,51378227,51408243);福建省国际科技合作重点项目(2014I0013);福建省高等学校杰出青年科研人才培养计划(JA14014)
摘    要:为了阐明厌氧环境下全氟羧酸(PFCAs)等全氟化合物的迁移归趋,研究了8:2氟调聚醇(8:2FTOH)的厌氧降解性能.结果表明,取自市政污水处理厂的污泥在厌氧条件下可还原降解8:2FTOH,并生成氟离子、全氟类和多氟类降解产物,且降解过程可采用双指数衰减模型拟合.在为期120d的培养中,8:2FTOH的摩尔降解率高达(93.2±0.9)%;摩尔回收率则随着培养时间的增加有下降的趋势,由培养初期(1d)的(97.5±5.1)%下降至末期(120d)的(68.9±4.0)%,这说明在培养后期可能产生了未知的降解产物或生成了未知的挥发性产物.8:2不饱和氟调聚酸(8:2FTUA)和全氟辛酸(PFOA)分别是摩尔产率最高的多氟类和全氟类降解产物,分别介于(6.94±0.10)%~(24.2±1.5)%和(2.67±0.22)%~(14.9±1.0)%的范围内.多氟类降解产物的摩尔产率随培养时间的增加先增加后降低,而全氟类降解产物的摩尔产率则随培养时间的增加持续增加,这说明其可能分别为中间降解产物和最终降解产物.

关 键 词:8:2FTOH  厌氧生物降解  降解产物  变化趋势  
收稿时间:2016-03-11

Anaerobic biodegradability of 8: 2 fluorotelomer alcohol (8: 2 FTOH)
LI Fei,CHEN Yi-dan,YANG Zhi-min,HUANG Hua-shan,ZHOU Zhen-ming,YUAN Bao-ling.Anaerobic biodegradability of 8: 2 fluorotelomer alcohol (8: 2 FTOH)[J].China Environmental Science,2016,36(11):3295-3303.
Authors:LI Fei  CHEN Yi-dan  YANG Zhi-min  HUANG Hua-shan  ZHOU Zhen-ming  YUAN Bao-ling
Institution:College of Civil Engineering, Huaqiao University, Xiamen 361021, China
Abstract:To elucidate the trends and fates of perfluorochemicals such as perfluorocarboxylates (PFCAs) under anaerobic environments, the anaerobic biodegradability of 8:2 fluorotemoler alcohol (8:2 FTOH) was studied. The results indicated that 8:2 FTOH could be decomposed under anaerobic conditions by sewage sludge collected from a municipal wastewater treatment plant, and produce fluoride, per- and poly-fluorinated compounds, and the decomposition data perfectly fitted a double exponential decay model. With an incubation time of 120d, the final molar degradation rate of 8:2 FTOH was up to (93.2±0.9)%, while its molar recoveries decreased with the incubation time, from (97.5±5.1)% at the beginning (1d) to (68.9±4.0)% at the end (120 d). These results indicated that some unknown or volatile products have been generated at the late of incubation. 2H-perfluoro-2-decenoic acid (8:2 FTUA) and perfluorooctanoic acid (PFOA) were the most abundant of poly- and perfluorinated products with the molar yields ranged from (6.94±0.10)% to (24.2±1.5)% and from (2.67±0.22)% to (14.9±1.0)%, respectively. With increasement of incubation time, the molar yields of polyfluorinated products firstly increased and then decreased, while the molar yields of perfluorinated products consistently increased, indicated that they might be the intermediate and final biodegradation products, respectively.
Keywords:8:2 FTOH  anaerobic biodegradation  biodegradation products  trends  
本文献已被 CNKI 等数据库收录!
点击此处可从《中国环境科学》浏览原始摘要信息
点击此处可从《中国环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号