首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高硬度电镀废水中水回用工程实例分析
引用本文:卢斯煜,陈凯,李建飞,柴少龙,罗伟锋.高硬度电镀废水中水回用工程实例分析[J].能源环境保护,2020,34(3):57-61.
作者姓名:卢斯煜  陈凯  李建飞  柴少龙  罗伟锋
作者单位:煤科集团杭州环保研究院有限公司,浙江 杭州311201
摘    要:台州某电镀企业采用“软化+砂滤+超滤+反渗透”组合工艺深度处理高硬度电镀废水,实现了再生废水的回用。工程处理规模为150 t/d,出水水质为COD≤20 mg/L,电导率≤300μS/cm,SS≤10 mg/L,pH 6~9,回用率≥50%。该工程总投资100万元,直接运行成本为13.88元/t,软化处理和反渗透系统CIP在线清洗提高了工艺运行的稳定性,减少了反渗透膜的污堵。

关 键 词:高硬度  深度处理  中水回用  工程实例

An engineering example of reuse of electroplating wastewater with high hardness
LU Siyu,CHEN Kai,LI Jianfei,CHAI Shaolong,LUO Weifeng.An engineering example of reuse of electroplating wastewater with high hardness[J].Energy Environmental Protection,2020,34(3):57-61.
Authors:LU Siyu  CHEN Kai  LI Jianfei  CHAI Shaolong  LUO Weifeng
Institution:(Hangzhou Environmental Protection Research Institute of China Coal Technology&Engineering Group,Hangzhou 311201,China)
Abstract:A combined process of"softening+sand filtration+ultrafiltration(UF)+reverse osmosis(RO)"is adopted to advancedly treat high hardness electroplating wastewater in an electroplating enterprise in Taizhou to reuse regenerated wastewater.In this project,the processing scale is 150 t/d.The effluent quality is COD≤20 mg/L,conductivity≤300μs/cm,SS≤10 mg/L,pH=6~9,and recycling rate≥50%.The total investment is 1 million yuan,and the direct operating cost is 13.88 yuan/t.Softening treatment and CIP online cleaning of RO system improve the operation stability and reduce the fouling of the RO membrane.
Keywords:High hardness  Advanced treatment  Reclaimed water reuse  Engineering example
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号