Mechanical properties of Municipal Solid Waste by SDMT |
| |
Authors: | Francesco Castelli Michele Maugeri |
| |
Affiliation: | 1. Geotechnical Engineering, Faculty of Engineering and Architecture, Kore University of Enna, 94100 Enna, Italy;2. Geotechnical Engineering, Department of Civil and Environmental Engineering, University of Catania, 95125 Catania, Italy |
| |
Abstract: | In the paper the results of a geotechnical investigation carried on Municipal Solid Waste (MSW) materials retrieved from the “Cozzo Vuturo” landfill in the Enna area (Sicily, Italy) are reported and analyzed. Mechanical properties were determined both by in situ and laboratory large-scale one dimensional compression tests.While among in situ tests, Dilatomer Marchetti Tests (DMT) is used widely in measuring soil properties, the adoption of the DMT for the measurements of MSW properties has not often been documented in literature. To validate its applicability for the estimation of MSW properties, a comparison between the seismic dilatometer (SDMT) results and the waste properties evaluated by laboratory tests was carried out.Parameters for “fresh” and “degraded waste” have been evaluated. These preliminary results seems to be promising as concerns the assessment of the friction angle of waste and the evaluation of the S-wave in terms of shear wave velocity. Further studies are certainly required to obtain more representative values of the elastic parameters according to the SDMT measurements. |
| |
Keywords: | Municipal Solid Waste Landfill Mechanical properties Dilatometer Marchetti Test (DMT) Laboratory tests |
本文献已被 ScienceDirect 等数据库收录! |
|