首页 | 本学科首页   官方微博 | 高级检索  
     检索      

铝粉表面超声波化学镀Ni-Co合金的研究
引用本文:李志广,米伟娟,俞梁.铝粉表面超声波化学镀Ni-Co合金的研究[J].装备环境工程,2014,11(5):6-9,31.
作者姓名:李志广  米伟娟  俞梁
作者单位:1. 军械工程学院,石家庄,050003
2. 河北传媒学院 信息技术系,石家庄,050051
基金项目:国防科技重点实验室基金项目(9140C870401130C87300) ; 军械工程学院科学研究基金项目( YJJXM12011 )
摘    要:目的在铝粉表面进行镀Ni-Co合金层的研究,为制备新型的空心陶瓷吸波材料提供基础原料。方法利用超声波化学镀法。结果铝粉经过超声波化学镀Ni-Co合金,质量增加平均百分率达到了89.0%,通过SEM,EDS和XRD分析,表明在铝粉表面形成了Ni-Co合金层。结论利用超声波化学镀法能够在铝粉表面形成Ni-Co合金层。

关 键 词:铝粉  超声波  化学镀  Ni-Co合金
收稿时间:7/9/2014 12:00:00 AM
修稿时间:2014/8/19 0:00:00

The Study of Ultrasonic Chemical Electroless Plating Ni-Co Alloy on the Surface of Aluminum Powder
LI Zhi-guang,MI Wei-juan and YU Liang.The Study of Ultrasonic Chemical Electroless Plating Ni-Co Alloy on the Surface of Aluminum Powder[J].Equipment Environmental Engineering,2014,11(5):6-9,31.
Authors:LI Zhi-guang  MI Wei-juan and YU Liang
Institution:Ordnance Engineering College, Shijiazhuang 050003, China;Department of Communication Technology, Hebei Institute of Communication, Shijiazhuang 050051, China;Ordnance Engineering College, Shijiazhuang 050003, China
Abstract:Objective To study the plating of Ni-Co alloy layer on the surface of aluminum powder and to offer the basic raw material for preparing the new-type hollow ceramic microsphere microwave absorbing material. Methods The Ni-Co alloy layer was prepared on the surface of aluminum powder by the ultrasonic chemical electroless plating method. Results The mass was increased by an average of 89. 0% after the aluminum powder was plated with Ni-Co alloy by ultrasonic chemical electroless plating. The SEM, EDS and XRD analyses showed that the Ni-Co alloy layer was formed on the surface of aluminum powder. Conclusion Ni-Co alloy layer could be formed on the surface of aluminum powder by the ultrasonic chemical electroless plating method.
Keywords:aluminum powder  ultrasonic  chemical electroless plating  Ni-Co alloy
本文献已被 CNKI 等数据库收录!
点击此处可从《装备环境工程》浏览原始摘要信息
点击此处可从《装备环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号