| Abstract: | Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium. |
