Analysis by slow-motion picture photography and scanning electron microscopy of radular function in Urosalpinx cinerea follyensis (Muricidae,Gastropoda) during shell penetration

Radular function in the muricid gastropod Urosalpinx cinerea follyensis Baker during shell penetration was examined with slow-motion picture photography and scanning electron microscopy. Particular attention was paid to possible injury of buccal structures by radular cusps. The presence of a flexible cuticulated buccal armature, and delicate synchronization of movements of odontophoral cartilages, subradular membrane, teeth, and buccal mass, explain the absence of shredding of live buccal tissues. Some light abrasion was evident, but generally only in the cuticulated gully of the subodontophoral shield, on the rim of the jaw, and on the anterior edge of the esophageal valve. Rasping at the surface of incomplete bore-holes is done by major cusps of rachidian teeth over the bending plane. Marginal teeth lie on the slopes of the odontophore, generally remain depressed below the level of rachidian teeth, and thus scrape the shell only lightly, if at all. The sharp posteriorly recurved shape of central and lateral rachidian cusps enhances their scooping effectiveness. These teeth produce smooth, conspicuous traces in the soft shell of Mya arenaria and shallow traces in the harder shell of Mytilus edulis Linné. The impact of individual cusp strikes was not evident in traces. With wear, rachidian cusps become increasingly blunted, a reflection of their ploughing action over chemically weakened shell, and are eventually sanded flat. Marginal teeth wear primarily at their ends, the tips becoming truncated as they pass lightly over the shell surface. The advancing edge of the odontophore during rasping strokes, plotted on the image from motion pictures moves slowly at first, then more rapidly in the middle of the stroke, and slows again at the end. Duration of strokes ranged from 0.45 to 0.75 sec. Duration of rasping cycles varied from 1.3 to 2.0 sec. The number of transverse rows of teeth passing over the bending plane during the rasping stroke varied from 14 to 32, and the average time for the passage of one transverse row over the bending plane ranged from 20 to 48 msec. The number of transverse rows of teeth remaining exposed beneath the odontophore below the bending plane at the end of the rasping stroke, and between the bending plane and the anterior end of the sulcus in the radular diverticulum, was approximately 10.