Real-time wastewater monitoring as tool to detect clandestine waste discharges into the sewage system

The entry of illegally discharged waste into the sewage system can cause serious damage to sewage pipes and harm the public domain. Besides industrial and communal sources, discharges from clandestine laboratories are of special forensic interest. Aim of this study is to investigate the possibility to detect clandestine discharges of possibly hazardous waste directly at the point of discharge. Tests were performed at a facility where real wastewater was pumped in a controlled way through an open sewage pipe above ground. Chloride, ammonia, pH and conductivity electrodes were investigated for their ability to detect discharges of different types of waste. Waste samples were diluted up to 50 times in a static wastewater environment and pH, conductivity and chloride electrodes were able to distinguish all waste dilutions from blank wastewater. These three electrodes were then used for dynamic tests by placing them inside flowing sewage water and discharging different types of liquid waste ten meters upstream of them. Parameters of the waste discharges like volume, time interval and speed of discharge were varied and the responses of the electrodes were collected. The dynamic tests showed that these three electrodes were able to pick up different waste discharges in a real wastewater environment. It was found that a high sampling rate of the sensors would be required to connect a certain discharge to a specific household connection. These findings highlight the possibility to locate illegal discharges, coming from a variety of sources, using the waste discharge itself.