首页 | 本学科首页   官方微博 | 高级检索  
     

聚合氯化铝锌絮凝剂的制备及其性能
引用本文:吴彦瑜,陈文纳,谢跃生. 聚合氯化铝锌絮凝剂的制备及其性能[J]. 化工环保, 2008, 28(1): 81-84
作者姓名:吴彦瑜  陈文纳  谢跃生
作者单位:广西师范学院,化学系,广西,南宁,530001
基金项目:广西自治区自然科学基金(057503); 广西自治区教育厅基金(200507179)。
摘    要:用在AlCl,与ZnCl2溶液中加NaOH溶液的方法制备无机高分子絮凝剂聚合氯化铝锌(PAZC),通过正交实验确定的最佳制备条件为:反应时间10min、碱化度2.2、氯化铝浓度0.5mol/L、NaOH溶液浓度0.5mol/L。在n(Zn):n(Al)=0.6、水样pH=7.8、PAZC加入量为5mg/L的条件下,浊度和COD去除率分别为98.9%和88.2%。PAZC与聚合氯化铝对各种工业废水的处理效果比较结果表明,PAZC对各种工业废水的处理效果较好。从废水处理成本来看,PAZC具有较好的经济效益。

关 键 词:无机高分子絮凝剂  聚合氯化铝锌  废水处理

Preparation and Properties of Poly Aluminum Chloride Flocculant
Wu Yanyu,Chen Wenna,Xie Yuesheng. Preparation and Properties of Poly Aluminum Chloride Flocculant[J]. Environmental Protection of Chemical Industry, 2008, 28(1): 81-84
Authors:Wu Yanyu  Chen Wenna  Xie Yuesheng
Abstract:Poly aluminum zinc chloride(PAZC),an inorganic polymeric flocculent,was prepared by the process of adding NaOH solution into the mixture of AlCl_3 and ZnCl_2 solution.Through the orthogonal tests,the optimum preparation conditions are determined as follows:reaction time 10 min, basicity 2.2,AlCl_3 concentration 0.5 mol/L and NaOH concentration 0.5 mol/L.Under the conditions of n(Zn):n(Al)0.6,water sample pH 7.8 and PAZC dosage 5 mg/L,the removal rate of turbidity and COD is 98.9% and 88.2% respectively.Comp...
Keywords:inorganic polymeric flocculent  poly aluminum zinc chloride  wastewater treatment  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号