| 地表水净化过程中生产废水处理工艺参数的调整 |
| |
| 引用本文： | 张建弟,孙宏伟,李立芳.地表水净化过程中生产废水处理工艺参数的调整[J].环境工程,2001,19(4):63. |
| |
| 作者姓名： | 张建弟 孙宏伟 李立芳 |
| |
| 作者单位： | 石家庄市地表水厂, |
| |
| 摘 要： | 石家庄市第八水厂采用常规净水处理工艺 ,设计规模为 30万m3 d,总生产废水为 1 0 6万m3 d ,运行中发现废水处理系统中的调节池出现大量存泥 ,既影响自身的调节功能 ,又影响整个系统的正常运行 ,本研究介绍了调整调节池中潜水泵的启停液位的解决方法 ,避免了人工停产清淤 ,使系统连续运行 ,节约了费用 ,目前 ,整个系统运行状态良好
|
| 关 键 词： | 给水厂 生产废水处理 调节池 存泥 调整 工艺参数 |
| 修稿时间： | 2000年9月25日 |
ADJUSTMENT OF PROCESS PARAMETERS FOR SLUDGE DISPOSAL DURING PURIFICA- TION OF SURFACE WATER |
| |
| Zhang Jiandi et al.ADJUSTMENT OF PROCESS PARAMETERS FOR SLUDGE DISPOSAL DURING PURIFICA- TION OF SURFACE WATER[J].Environmental Engineering,2001,19(4):63. |
| |
| Authors: | Zhang Jiandi |
| |
| Institution: | Zhang Jiandi et al |
| |
| Abstract: | Shijiazhuang NO.8 Water Plant was designed to treat water of 300,000m 3/d,and a total production sewage of 10,600m 3/d was to be treated.In the past operation,there was a large amount of the sludge in the regulating tank of the sewage treatment system,which influenced not only the regulating function,but also the normal operationn of the whole system.The problem has been solved by adjusting the start stop level of the diving pump in the regulating tank,which makes the system operate continuously and lower cost.Now it runs well. |
| |
| Keywords: | water plant process sewage treatment regulating tank stock sludge adjustment and process parameter |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
