首页 | 本学科首页   官方微博 | 高级检索  
     检索      

PM10中重金属的分布及其在模拟酸雨中的释放
引用本文:冯茜丹,党志,王焕香,鲁言波,吕玄文,黄伟林.PM10中重金属的分布及其在模拟酸雨中的释放[J].环境科学,2006,27(12):2386-2391.
作者姓名:冯茜丹  党志  王焕香  鲁言波  吕玄文  黄伟林
作者单位:华南理工大学环境科学与工程学院 广州510640;华南理工大学环境科学与工程学院 广州510640;广东省环境保护监测中心站 广州510645;广东省环境保护监测中心站 广州510645;华南理工大学环境科学与工程学院 广州510640;Department of Environmental Sciences Rutgers University;New Brunswick;New Jersey 08901-8551 USA
基金项目:广东省科技厅重大专项项目(2004A30308002)
摘    要:运用扫描电镜-X射线能谱分析方法(SEM-EDS)和电感耦合等离子体-原子发射光谱法(ICP-AES),分析和测定了佛山市可吸入颗粒物(PM10)及其中重金属的赋存状态和质量分布.同时研究了模拟酸雨淋溶条件下PM10中重金属Cu、Pb、Zn和Cd的释放过程.结果表明,颗粒物在大气中存在的形态各异,主要以簇状集合体形式存在.PM10日平均浓度为0.19 mg/m3,与国家二级标准(0.15 mg/m3)相比,超标率为79%.PM10中含有一定量的Zn、Pb、Cu和Cd,其中Zn、Pb的含量要高于Cd和Cu.模拟酸雨淋溶实验显示,PM10中Cu、Pb、Zn、Cd均有不同程度的释放,Cd和Zn的释放率明显高于Cu和Pb,且释放速率较快;pH值是影响4种重金属释放的主要因素,随模拟淋溶液pH值降低,重金属的释放强度显著提高.

关 键 词:可吸入颗粒物(PM10)  模拟酸雨  重金属  释放
文章编号:0250-3301(2006)12-2386-06
收稿时间:2005-12-15
修稿时间:2005-12-152006-03-15

Distribution of Heavy Metals in PM10 and the Release of Them in the Simulated Acid Rain
Feng Xi-dan,Dang Zhi,Wang Huan-xiang,Lu Yan-bo,Lü Xan-wen,Huang Wei-lin.Distribution of Heavy Metals in PM10 and the Release of Them in the Simulated Acid Rain[J].Chinese Journal of Environmental Science,2006,27(12):2386-2391.
Authors:Feng Xi-dan  Dang Zhi  Wang Huan-xiang  Lu Yan-bo  Lü Xan-wen  Huang Wei-lin
Institution:1.College of Environmental Science and Engineering, South China University of Technology, Guangzhou 510640, China; 2.Environmental Monitoring Center Station of Guangdong Province, Guangzhou 510045, China; 3. Department of Environmental Sciences, Rutgers University, New Brunswick, New Jersey, 08901-8551, USA
Abstract:The distribution of heavy metals in inhalable particulate matter(PM10),which were collected in Foshan during December of 2004,was characterized by scanning electron microscope-X-ray energy dispersive analysis technique(SEM-EDS) and inductively coupled plasma-atomic emission spectroscopy(ICP-AES).The releases of Cu,Pb,Zn and Cd were also examined for their potential releases in simulated acid rain,which were quantified with batch reactors.The results showed that the daily average concentration of PM10 was 0.19(mg/m3),about 79% higher than the secondary standard of China.The relatively contents of Zn and Pb in PM10 were much higher than Cd and Zn,whereas the releasing rates of Cd and Zn in simulated acid rain were greater than that of Cu and Pb.The releasing rates of heavy metals from PM10 were increased as the pH of the acid rain decreased.
Keywords:inhalable particulate(PM10)  simulated acid rain  heavy metal  release
本文献已被 CNKI 维普 PubMed 等数据库收录!
点击此处可从《环境科学》浏览原始摘要信息
点击此处可从《环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号