Selective Leaching of Valuable Metals from Waste Printed Circuit Boards |
| |
Authors: | Chi Jung Oh Sung Oh Lee Hyung Sik Yang Tae Jun Ha |
| |
Institution: | 1. Korea Chemical Co. , Kwangju , Korea;2. Department of Civil, Earth, and Environmental Engineering , Chonnam National University , Kwangju , Korea |
| |
Abstract: | Abstract This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H2SO4 and 0.2 M H2O2 at 85 °C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 °C with a leaching solution of 0.2 M (NH4)2S2O3, 0.02 M CuSO4, and 0.4 M NH4OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature. |
| |
Keywords: | |
|
|