Abstract: | Three different methods for the sequential extraction of heavy metals from soil (viz those of Tessier et al. (A. Tessier, P.G. Campbell and N. Bisson (1979). Anal. Chem., 51, 844.), Sposito et al. (G. Sposito, L.J. Lund and A.C. Chang (1989). Soil. Sci. Soc. Am. J., 46, 260.) and Mann and Ritchie (S.S. Mann and G.S.P. Ritchie (1993). Aust. J. Soil Res., 31, 255.)) were examined in terms of the distribution of Cu, Zn and Pb in the soil phases and the bioavailability of these elements in soil. To this end, several samples of soils polluted with metals from a copper mine were fractionated by using the three studied methods and analyzed by atomic absorption spectrometry. The results revealed differences in extraction efficiency among the methods due to the extractant used, or its concentration, and to the soil/solution ratio. The three methods were found to provide accurate heavy metal background contents. However, the method of Tessier et al. is to be preferred for quantifying increased levels of heavy metals on account of its high extraction power. |