| 合成聚合物对印染废水处理的研究 |
| |
| 引用本文： | 黄国林 乐长高. 合成聚合物对印染废水处理的研究[J]. 环境与开发, 1996, 11(3): 13-16 |
| |
| 作者姓名： | 黄国林 乐长高 |
| |
| 作者单位： | 华东地质学院应化系(黄国林)，中山大学化学系(乐长高) |
| |
| 摘 要： | 采用合成聚合物对江西抚州印染厂废水进行絮凝处理，结果表明：合成聚合物处理印染废水，对降低废水中化学需氧量，色度具有显著的效果．ＣＯＤＣｒ去除率５０％左右，色度去除率达９０％．
|
| 关 键 词： | 合成聚合物印染废水化学需氧量色度 |
Study on the Clean Production in phosphating at low temperature for ironand steel |
| |
| Wei Lian. Study on the Clean Production in phosphating at low temperature for ironand steel[J]. Environment and Exploitation, 1996, 11(3): 13-16 |
| |
| Authors: | Wei Lian |
| |
| Abstract: | Synthetic plovmer was used to treat the wastewater from FuZhou printing and dyeing factory in JiangXi provice,c lot of laboratorical data had been obtained.The result showed that the method of tracting printing and dycing wastewatcr with ploymer was successful on decreasing chemical oxygen dimand and colour ects.The Remoring Rabe of COD Cr is about 50% and the Remoring Rate of colour is 90%. |
| |
| Keywords: | Printing and dyeing Syntheric ploymer wastewater Chemical oxygen dimand(COD) Colour |
| 本文献已被 CNKI 维普 等数据库收录！ |
