| 热闷钢渣用单轨移动罩车的设计 |
| |
| 引用本文： | 陈玲,刘瑱,彭亦明,周然. 热闷钢渣用单轨移动罩车的设计[J]. 环境工程, 2013, 31(3): 103-105. DOI: 10.13205/j.hjgc.201303026 |
| |
| 作者姓名： | 陈玲 刘瑱 彭亦明 周然 |
| |
| 作者单位： | 中冶建筑研究总院有限公司,北京,100088 |
| |
| 摘 要： | 根据钢渣热闷工艺要求进行单轨移动罩车的结构设计与行走装置的设计,通过三维建模软件及理论力学分析计算此罩车的配重及质心,使罩车与导向装置接触处的压力最小,且罩车施加给低地轨的横向静摩擦力最小。通过此方法设计的单轨移动罩车能大大改善钢渣热闷厂房的工作环境,减少厂房的腐蚀,提高厂房屋顶的寿命周期。
|
| 关 键 词： | 单轨 罩车 配重 腐蚀 |
DESIGN OF A MONORAIL MOVING COVER VEHICLE FOR HOT STUFFY STEEL SLAG |
| |
| Chen Ling Liu Zhen Peng Yiming Zhou Ran. DESIGN OF A MONORAIL MOVING COVER VEHICLE FOR HOT STUFFY STEEL SLAG[J]. Environmental Engineering, 2013, 31(3): 103-105. DOI: 10.13205/j.hjgc.201303026 |
| |
| Authors: | Chen Ling Liu Zhen Peng Yiming Zhou Ran |
| |
| Affiliation: | Chen Ling Liu Zhen Peng Yiming Zhou Ran(Central Research Institute of Building and Construction Co.,Ltd,MCC,Beijing 100088,China) |
| |
| Abstract: | Construction design and walk device design of a monorail moving cover vehicle were done according to steel slag hot stuffy technological requirements.And the balance weight and the center of mass design of this vehicle were computed by three-dimensional modeling software and theoretical mechanics analysis,which made the touched force be the least between the vehicle and the guide,and the static friction force be the least on the low ground rack suffering from the vehicle.By this way the vehicle was able to improve the work environment in the steel slag hot stuffy workshop,and reduce the workshop corrosion,and improve the life cycle of the workshop roof. |
| |
| Keywords: | monorail cover vehicle balance weight corrosion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《环境工程》浏览原始摘要信息 |
|
点击此处可从《环境工程》下载全文 |
|
