首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Effect of Reprocessing and Accelerated Weathering on ABS Properties
Authors:J M Pérez  J L Vilas  J M Laza  S Arnáiz  F Mijangos  E Bilbao  L M León
Institution:1.Departamento de Química Física, Facultad de Ciencia y Tecnología,Universidad del País Vasco (UPV/EHU),Bilbao,Spain;2.Departamento de Reciclado y Valorización,Fundación Gaiker,Zamudio,Spain;3.Departamento de Ingeniería Química y Medio Ambiente,Escuela Universitaria de Ingeniería Técnica Minera, Universidad del País Vasco (UPV/EHU),Barakaldo,Spain
Abstract:The feasibility of reprocessing has been investigated as a possible alternative for acrylonitrile–butadiene–styrene terpolymer (ABS) recycling. Up to 10 reprocessing cycles have been performed by both extrusion and injection techniques and their effect on thermal and mechanical properties have been studied. Moreover, the effect of the combined reprocessing and accelerated weathering has been analyzed. Measurements collected after each molding cycle indicated virtually complete retention of thermal properties. The same behaviour has been observed from accelerated weathering tests. With respect to the mechanical properties, neither the flow index nor the tensile strength were affected by the number of reprocessing cycles though the impact strength decreased slightly. However, the studies based on the accelerated weathering show that there is an important influence of the number of reprocessing cycles on the tensile strength.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号