首页 | 本学科首页   官方微博 | 高级检索  
     

斜坡上单桩的统一极限抗力分布模式研究∗
引用本文:张建伟,李荣翔,余杭,王浩. 斜坡上单桩的统一极限抗力分布模式研究∗[J]. 防灾减灾工程学报, 2020, 0(2): 160-166
作者姓名:张建伟  李荣翔  余杭  王浩
作者单位:河南大学土木建筑学院,河南 开封 475004;河南省轨道交通智能建造工程研究中心,河南 开封 475004;永威置业集团有限公司,河南 郑州 450000
基金项目:国家自然科学基金项目(51508163,51608071);河南省科技厅科技攻关重点项目(192102310226);河南省高等学校青年骨干教师培养计划(2019GGJS041);河南省教育厅科学技术研究重点项目(14B560020)资助
摘    要:假定土体为理想弹塑性体,基于统一极限抗力分布模式,利用最小势能原理,计算不同坡角时的桩前土体极限抗力,得到斜坡上单桩水平承载力的弹塑性解,并编制了相应的MATLAB计算程序。通过室内模型试验,验证了基于统一极限抗力分布模式计算得到的斜坡上单桩的水平承载力和桩身弯矩是合理的。结果表明:单桩的水平承载力随斜坡坡角的增加而降低,坡角为45°时桩顶的水平位移是坡角为15°时的1.45倍,斜坡坡角的大小对单桩的水平承载特性有较大的影响。

关 键 词:桩基础; 斜坡; 统一极限抗力分布模式; 水平承载特性
收稿时间:2018-03-10

Study on the Unified Limit Force Profile of Single Pile in Sloping Ground
ZHANG Jianwei,LI Rongxiang,YU Hang,WANG Hao. Study on the Unified Limit Force Profile of Single Pile in Sloping Ground[J]. Journal of Disaster Prevention and Mitigation Engineering, 2020, 0(2): 160-166
Authors:ZHANG Jianwei  LI Rongxiang  YU Hang  WANG Hao
Abstract:Based on the unified limit resistance distribution mode, the ultimate resistance of a single pile under different slope angles was calculated by using the minimum potential energy principle. The elastoplastic solution for the horizontal bearing capacity of a single pile in the slope was obtained by compiled MATLAB program. In order to verify the calculated horizontal bearing capacity and pile bending moment of single pile in the slope, a model test was carried out. The results show that the horizontal bearing capacity of a single pile decreases with the increase of the slope angle. The horizontal displacement of the pile in a 45° slope is 1.45 times that in a 15° slope. The variation of slope angle has a great influence on the horizontal bearing characteristics of the single pile.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《防灾减灾工程学报》浏览原始摘要信息
点击此处可从《防灾减灾工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号