首页 | 本学科首页   官方微博 | 高级检索  
     检索      

氯化铵镀镉与无氰镀镉-钛镀层性能对比研究
引用本文:汤智慧,陆峰,张晓云,宇波.氯化铵镀镉与无氰镀镉-钛镀层性能对比研究[J].装备环境工程,2006,3(6):22-25.
作者姓名:汤智慧  陆峰  张晓云  宇波
作者单位:北京航空材料研究院,北京,100095
摘    要:对超高强度钢的氯化铵镀镉与无氰镀镉-钛两种防护镀层进行了对比研究。采用SEM分析了镀层微观形貌,用中性盐雾、天然海水浸泡和周期浸润试验评价镀层耐腐蚀性能,通过持久拉伸氢脆试验评价两种工艺的氢脆倾向,并探讨了两种工艺低氢脆机理。研究结果表明,无氰镀镉-钛镀层耐腐蚀性能和低氢脆性能都优于氯化铵镀镉镀层。

关 键 词:氯化铵镀镉  镀镉-钛  氢脆  抗腐蚀性能
文章编号:1672-9242(2006)06-0022-04
收稿时间:2006-09-06
修稿时间:2006年9月6日

Research on the Performance of Cadmium Plating from Ammonium Chloride Bath and Cd-Ti Plating from Non-cyanide Bath
TANG Zhi-hui,LU Feng,ZHANG Xiao-yun,YU Bo.Research on the Performance of Cadmium Plating from Ammonium Chloride Bath and Cd-Ti Plating from Non-cyanide Bath[J].Equipment Environmental Engineering,2006,3(6):22-25.
Authors:TANG Zhi-hui  LU Feng  ZHANG Xiao-yun  YU Bo
Institution:Beijing Institute of Aeronautical materials, Beijing 100095, China
Abstract:The performance of Cadmium plating from ammonium chloride bath and Cd-Ti plating from non-cyanide bath on super high-strength steels were discussed.Surface morphology of plating was analyzed by SEM.Corrosion resistance of plating was characterized by neutral salt spray test,soaking test in sea water and alternating immersion corrosion test.Hydrogen embrittlement tendency of process was estimated by direct tensile method and hydrogen embrittlemen mechanism was discussed.It was found that Cd-Ti plating had better performance of corrosion resistance and low hydrogen embrittlement tendency than cadmium plating from ammonium chloride bath.
Keywords:cadmium plating from ammonium chloride bath  CdTi plating  hydrogen embrittlement  corrosion resistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号