Release of gaseous bromine from the photolysis of nitrate and hydrogen peroxide in simulated sea-salt solutions

We have carried out a series of laboratory experiments to investigate the oxidation of bromide (Br^?) by hydroxyl radical (OH) in solutions used to mimic sea-salt particles. Aqueous halide solutions with nitrate or hydrogen peroxide (HOOH) as a photochemical source of OH were illuminated with 313 nm light and the resulting gaseous bromine (Br*(g)) was collected. While illumination of these solutions nearly always formed gaseous bromine (predominantly Br₂ based on modeling results), there was no evidence for the release of gaseous chlorine. The rate of Br*(g) release increased (up to a plateau value) with increasing concentrations of bromide and was enhanced at lower pH values for both nitrate and HOOH solutions. Increased ionic strength in nitrate solutions inhibited Br*(g) release and the extent of inhibition was dependent upon the salt used. In HOOH solutions, however, no ionic strength effects were observed and the presence of Cl^? strongly enhanced Br*(g) release.Overall, for conditions typical of aged, deliquesced, sea-salt particles, the efficiencies of gaseous bromine release, expressed as mole of Br*(g) released per mole of OH photochemically formed, were typically 20–30%. Using these reaction efficiencies, we calculated the Br₂(g) release rate from aged, ambient sea-salt particles due to OH oxidation to be approximately 0.07 pptv h^?1 with the main contributions from nitrate photolysis and partitioning of gas-phase OH into the particle. While our solution conditions are simplified compared to ambient particles, this estimated rate of Br₂ release is high enough to suggest that OH-mediated reactions in sea-salt particles could be a significant source of reactive bromine to the marine boundary layer.