Study of lignocellulosic biomass ignition properties estimation from thermogravimetric analysis |
| |
Affiliation: | 1. Universidad Politécnica de Madrid & Laboratorio Oficial Madariaga, Spain;2. Department of Safety, Chemistry and Biomedical Laboratorio Sciences, HVL, Haugesund, Norway;1. E.T.S. Ingenieros de Minas y Energía, Universidad Politécnica de Madrid, Madrid, Spain;2. Laboratorio Oficial J.M. Madariaga (LOM), Universidad Politécnica de Madrid, Madrid, Spain;1. Universidad Politécnica de Madrid (UPM), Madrid, Spain;2. Laboratorio Oficial J.M. Madariaga (LOM), Madrid, Spain;1. Western Norway University of Applied Sciences, Bjørnsonsgt. 45, N-5528 Haugesund, Norway;2. Otto von Guericke University, Universitätsplatz 2, D-39106 Magdeburg, Germany;3. RISE Fire Research AS, Tillerbruvegen 202, N-7092 Tiller, Norway;1. Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, India;2. Department of Civil Engineering, University Institute of Engineering and Technology MDU Rohtak, 124001, India;1. Mechanical Engineering Imperial College London, SW7 2AZ, UK;2. Department of Fire Safety and HSE Engineering, Western Norway University of Applied Sciences, Haugesund, Norway |
| |
Abstract: | In the last decade, the use of renewable resources has increased significantly in order to reduce the energetic dependence on fossil fuels, as they have an important contribution to the global warning and greenhouse gasses effect. Because of that, research on biofuels has been increased in the last years as its characteristics of use match those of the conventional fuel's: solid biomass can be used instead of coals, and biodiesel could replace diesel. Research on solid biomass ignition properties has been considerably developed because of the amount of industrial accidents related to the treatment and use of solid biomass (self-ignition, dust explosions, etc.). On the other hand, thermogravimetric analysis (TGA) is becoming and important characterization technique as it can be used to determine a wide spectrum of properties, such as kinetics, composition, proximate analysis, etc. This research aims to combine thermal analysis and ignition properties, by using the TGA to obtain the elemental composition of lignocellulosic biomass and compare those results to Minimum Ignition Energy (MIE) values test output, so a relation between composition and MIE can be found.To achieve this aim, biomass samples from different origins have been used: oil palm wastes (empty fruit bunches, mesocarp fiber and palm kernel shell), agricultural wastes (straw chops) and forestry wastes (wood chips and wood powder). Also, raw materials and torrefied biomass were compared. The hemicellulose/cellulose ratio was calculated and compared to different flammability properties, finding out that the greater the ratio and the lower the onset temperature (temperature at which the pyrolysis reaction accelerates), the lower was the minimum ignition energy. From this basis it was possible to define “tendency areas” that grouped the samples whose MIE values were similar. Three tendency areas were found: high minimum ignition energy, medium minimum ignition energy, and low ignition energy. |
| |
Keywords: | Flammability Thermal analysis Biomass Minimum ignition energy |
本文献已被 ScienceDirect 等数据库收录! |
|