首页 | 本学科首页   官方微博 | 高级检索  
     检索      

旋转水射流清洗钢管内外表面的方法
引用本文:尤明庆,郑友益,崔谟慎,郑光相,王胜利,熊德国.旋转水射流清洗钢管内外表面的方法[J].中国安全科学学报,1999,9(Z1).
作者姓名:尤明庆  郑友益  崔谟慎  郑光相  王胜利  熊德国
作者单位:1. 焦作工学院
2. 平顶山职工大学
基金项目:河南省杰出青年基金资助
摘    要:以小型三柱塞泵为动力,利用两套旋转水射流同时对钢管内外表面进行清洗,清洗喷头的移动和被清洗件的替换动作,由三柱塞泵驱动的液压油缸及其牵引的钢丝绳操作,系统仅有单一动力装置。旋转接头采用胶状体拦截固体颗粒,利用悬浮安装的O 型圈密封压力;可在压力12MPa 以下,输送磨料浆液,每分钟300 转时,寿命可达1000 小时。清洗液可以进行加热,并过滤循环使用。该方法已在煤矿单体液压支柱的清洗作业中得到使用,清洗速度达到每小时(40~60)根缸筒或活塞柱。

关 键 词:清洗  钢管  单体柱  旋转射流  旋转接头

Method for Cleaning the Outer and Inner Surface of the Cylinder with Swirling Water Jet
You Mingqing,Zheng Youyi,Cui Moshen,Zheng Guangxiang,Wang Shengli,Xiong Deguo.Method for Cleaning the Outer and Inner Surface of the Cylinder with Swirling Water Jet[J].China Safety Science Journal,1999,9(Z1).
Authors:You Mingqing  Zheng Youyi  Cui Moshen  Zheng Guangxiang  Wang Shengli  Xiong Deguo
Institution:You Mingqing Zheng Youyi Cui Moshen (Jiaozuo Institute of Technology) Zheng Guangxiang Wang Shengli Xiong Deguo (Workers University of Pingdingshan)
Abstract:A system with two swirling water jets is developed for cleaning the outer and inner surface of the cylinder. Only one pump with a pressure of 4MPa and a flow rate of 38L/min is used to provide pressured water for cleaning and moving the nozzle as well. A swivel point for transporting slurry up to a pressure of 12MPa is given, which obstructs particles with glue material and seals the pressure with a suspending O ring. The life of O ring in this joint reaches 1000hrs, under a speed of 300rpm.
Keywords:High pressure  Abrasive slurry  Swivel joint  O ring
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号