首页 | 本学科首页   官方微博 | 高级检索  
     


Influence of welding speed and power on residual stress during gas tungsten arc welding (GTAW) of thin sections with constant heat input: A study using numerical simulation and experimental validation
Affiliation:1. GRIDS Research Group, Department of Mechanical Engineering, University of Aveiro, Portugal;2. Department of Industrial Engineering, University of Salerno, Italy;1. School of Materials Science and Engineering, China University of Mining and Technology, Xuzhou 221116, PR China;2. College of Applied Science and Technology, China University of Mining and Technology, Xuzhou 221116, PR China;1. College of Materials Science and Engineering, Hunan University, Changsha 410082, China;2. State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China
Abstract:The temperature distribution and residual stresses for a GTAW circumferential butt joint of AISI 304 stainless steel using numerical simulation have been evaluated. For evaluation of weld induced residual stresses, the analysis of heat source fitting was carried out with heat inputs ranging from 200 to 500 J/mm to arrive at optimal heat input for obtaining proper weld penetration and heat affected zone (HAZ). For this chosen heat input, the influence of different weld speeds and powers on the temperature distribution and the residual stresses is studied. The heat source analysis revealed the best choice of heat input as 300 J/mm. The residual stresses on the inner and outer surfaces, and along the radial direction were computed. Increase in temperature distribution as well as longitudinal and circumferential residual stresses was observed with the increase in weld speed and power. The validity of the results obtained from numerical simulation is demonstrated with full scale shop floor welding experiments.
Keywords:Numerical simulation  Heat source fitting  Weld pool size  Temperature distribution  GTAW  Residual stresses
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号