| Abstract: | A new process for enhancing in-situ remediation of low-permeability soil and rock formations is presently under development at the Hazardous Substance Management Research Center (HSMRC). The patented process, known as ?pneumatic fracturing,”? consists of injecting high-pressure air or other gas into contaminated geologic formations at controlled flow rates and pressures. In fine-grained soils such as clay, pneumatic fracturing creates conductive channels in the formation, thereby increasing the permeability and exposed surface area of the contaminated soil. The potential benefits of pneumatic fracturing are significant, since in-situ remedial technologies are essentially limited by the pore gas exchange rate of the soil being treated. This article describes the results of a recent demonstration of pneumatic fracturing at an industrial site to enhance a volatile organic compound (VOC) extraction system. After establishing the baseline removal rate of soil gas effluent from the clay, soil surrounding the extraction system was fractured to enhance VOC with drawal. A substantial improvement in the VOC removal rate was observed, including: (1) flush effluent concentrations that increased up to 200 times; and (2) air flows in the formation that increased up to 1,000 times. |
