SedTrap: A Conceptual Model for Trap Efficiencies in a Sedimentation Basin

Sedimentation basins and sediment traps are established methodologies for reducing sediment and other pollutants exiting small watersheds such as urban areas and construction sites. However, estimating the trap efficiency or designing a basin or trap to provide a pre-determined trap efficiency, is difficult, especially for dynamic conditions of water and sediment inflow. A conceptual dynamic model, called SedTrap, was developed that can be used to assess the varying removal efficiencies as a storm is routed through different sized basins or traps. The model uses the STELLA® modeling software from Iseesystems, Inc. to build a dynamic model to route both water and sediment through the system. Settling velocities are determined for a range of sediment sizes and temperatures using the Rubey-Watson law and compared to the more traditional Stokes’ law. The variation of efficiencies with time and by sediment size as the basin fills with sediment is also addressed. The results for the example used show a decrease in trap efficiencies with decreasing particle size, which leads to an increase in percent fine material of total sediment load at the outlet of the basin. This “fining” of the material coupled with the higher surface area per mass of the fine particles has implications for changes in the upstream-downstream concentrations of adsorbed contaminants.