Integrated effects of applied pressure,time, and polymer doses on alum sludge dewatering behaviour

In this study, combinations of applied pressure, pressing time and polymer dose were examined in an air pressure plate apparatus to explore their integrated influence on the dewatering of an alum sludge. Results of the investigation demonstrated that dewatering can be enhanced by increases in pressure and time. However, a point is reached at which continued increases in pressure and time offer little benefit. The data also confirmed that polymer affects the rate of water release rather than the extent of dewatering. Increased rates of water release due to increasing polymer dose can be attributed to the aggregation of sludge particles by polymer addition. It was also evident in this study that the initial sludge depth has a major impact on the average cake moisture content at a given dewatering time. It was apparent that once the initial sludge thickness exceeds about 2 cm, the water release follows a fairly similar pattern, which can be represented by a simple empirical model.