首页 | 本学科首页   官方微博 | 高级检索  
     检索      

弹载相控阵天线系留液冷散热设计与优化分析
引用本文:杨科,郭威威.弹载相控阵天线系留液冷散热设计与优化分析[J].装备环境工程,2021,18(12):37-41.
作者姓名:杨科  郭威威
作者单位:中国空空导弹研究院,河南 洛阳 471099
摘    要:目的对某相控阵天线开展散热设计与优化分析。方法基于液冷强迫散热设计理论方法,进行某型相控阵雷达天线热设计,制定液冷散热方案。应用CFD仿真软件FloEFD建立流固耦合热仿真模型,对天线散热情况进行热仿真分析,得到该设备关键测试点的温度变化情况。结果热仿真结果表明,整个系留测试试验中,关键监测点的最高温度在允许的工作温度范围内;每个系留测试周期中存在散热冗余时间。结论热仿真分析表明,该设备制定的热设计方案可以满足使用要求,并为设备的设计改进和测试方案的优化提供指导和建议。

关 键 词:热设计  热仿真  液冷
收稿时间:2021/4/25 0:00:00
修稿时间:2020/6/21 0:00:00

Design and Optimization Analysis of Liquid Cooling for a Missile-Borne Phased Array Antenna
YANG Ke,GUO Wei-wei.Design and Optimization Analysis of Liquid Cooling for a Missile-Borne Phased Array Antenna[J].Equipment Environmental Engineering,2021,18(12):37-41.
Authors:YANG Ke  GUO Wei-wei
Institution:AVIC China Airborne Missile Academy, Luoyang 471099, China
Abstract:Based on the theory and method of water-cooled forced cooling, the thermal design of a phased array radar antenna was carried out, and liquid cooling scheme was formulated. The fluid-solid coupling thermal simulation model was built based on the CFD simulation software FloEFD. The temperature change of the key test point on the antenna was introduced by the thermal simulation for the heat dissipation of the antenna. The thermal simulation results showed that the maximum temperature of the key test points was within the allowable operating temperature range in the whole tethered test. And there was redundant time for cooling in each test period. Thermal simulation analysis indicated that the thermal design project of this device fulfilled the requirements, which also provides guidance and suggestions for the design improvement of the equipment and the optimization of the test project.
Keywords:thermal design  thermal simulation  liquid cooling
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《装备环境工程》浏览原始摘要信息
点击此处可从《装备环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号