| 铁基合金脱除磷化氢中的砷化氢 |
| |
| 引用本文： | 韩长秀,韩新宇,杨丽,刘双喜,张宝贵. 铁基合金脱除磷化氢中的砷化氢[J]. 环境工程学报, 2010, 4(7): 1601-1604 |
| |
| 作者姓名： | 韩长秀 韩新宇 杨丽 刘双喜 张宝贵 |
| |
| 作者单位： | 南开大学化学学院新催化材料科学研究所,天津 300071,南开大学环境科学与工程学院，天津 300071,南开大学环境科学与工程学院，天津 300071,南开大学化学学院新催化材料科学研究所,天津 300071,南开大学环境科学与工程学院，天津 300071 |
| |
| 基金项目： | 天津市自然科学基金资助项目（043801311） |
| |
| 摘 要： | 为了脱除磷化氢中的砷化氢,合成了Fe-B非晶态合金和Fe(Cu)P合金,实验了它们对磷化氢中砷化氢的脱除作用,并与锌粉和Co-B非晶态合金进行了比较。结果表明,Fe(Cu)P效果最佳,脱砷温度低、脱砷容量大,而且合成原料价廉易得;而Fe-B非晶态合金优于Co-B非晶态合金以及锌粉。
|
| 关 键 词： | Fe-B非晶态合金 Fe(Cu)P 脱砷剂 磷化氢 砷化氢制备 |
Removal of arsine in PH3 by Fe-based alloy |
| |
| Han Changxiu,Han Xinyu,Yang Li,Liu Shuangxi and Zhang Baogui. Removal of arsine in PH3 by Fe-based alloy[J]. Techniques and Equipment for Environmental Pollution Control, 2010, 4(7): 1601-1604 |
| |
| Authors: | Han Changxiu Han Xinyu Yang Li Liu Shuangxi Zhang Baogui |
| |
| Abstract: | Fe-B amorphous alloy and Fe(Cu)P alloy were prepared. As dearsenic agents, their performances of removing arsine in PH3 were investigated. Results show that Fe(Cu)P alloy has the best removal performance such as lower operating temperature, higher removal capacity and lower preparation cost. The results also show that the removal performance of Fe-B amorphous alloy is better than that of Co-B amorphous alloy and zinc power. |
| |
| Keywords: | Fe-B amorphous alloy Fe(Cu)P dearsenic agent phosphine AsH3 |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《环境工程学报》浏览原始摘要信息 |
|
点击此处可从《环境工程学报》下载全文 |
|
