首页 | 本学科首页   官方微博 | 高级检索  
     

UNITANK+接触氧化工艺处理制皂废水
引用本文:陆杰,徐高田,蒋海涛,郑乐平. UNITANK+接触氧化工艺处理制皂废水[J]. 环境科学与技术, 2001, 24(5): 23-25,39
作者姓名:陆杰  徐高田  蒋海涛  郑乐平
作者单位:上海大学环境与化工学院,
摘    要:采用 U NITANK系统和生物接触氧化工艺处理主要污染物为油脂、甘油等的制皂工业废水。经过试验研究 ,工艺参数选择和运行处理效果分析 ,结果证明 ,采用该工艺处理制皂工业废水 ,三格池好氧 U NITANK系统的容积负荷为1.5 kg CODCr/m3· d时 ,COD去除率可达 80 % ,接触氧化池的 COD去除率亦在 80 %左右 ,处理效果稳定

关 键 词:制皂废水  UNITANK系统  生物接触氧化
文章编号:1003-6504(2001)05-0023-03

Treatment of soap wastewater by UNITANK and contact oxidation
LU Jie,XU Gao tian,JIANG Hai tao,ZHENG Le ping. Treatment of soap wastewater by UNITANK and contact oxidation[J]. Environmental Science and Technology, 2001, 24(5): 23-25,39
Authors:LU Jie  XU Gao tian  JIANG Hai tao  ZHENG Le ping
Abstract:The UNITANK and contact oxidation were applied on treatment of soap wastewater in which main contaminations are lipin, glycerol, etc.. By examination, operational parameters optimization and analyzing the operation effect, the results demonstrated that the volume loading of 3 cells UNITANK is 1.5 kgCOD Cr /m 3·d, the removal of COD is about 80%, and the COD removal of contact oxidation is about 80%.
Keywords:Soap wastewater  UNITANK  Contact oxidation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号