首页 | 本学科首页   官方微博 | 高级检索  
     

煤层瓦斯含量测定定点取样方法研究进展
引用本文:张宏图1,2,3,魏建平1,2,3,王云刚1,2,3,李辉1,2,3. 煤层瓦斯含量测定定点取样方法研究进展[J]. 中国安全生产科学技术, 2016, 12(1): 186-192. DOI: 10.11731/j.issn.1673-193x.2016.01.035
作者姓名:张宏图1  2  3  魏建平1  2  3  王云刚1  2  3  李辉1  2  3
作者单位:(1.河南省瓦斯地质与瓦斯治理省部共建国家重点实验室培育基地,河南 焦作 454000; 2.河南理工大学安全科学与工程学院,河南 焦作 454000; 3.煤炭安全生产河南省协同创新中心,河南 焦作 454000)
摘    要:基于文献调研及前期研究,分析了目前煤矿井下煤层瓦斯含量直接测定时所采用定点取样方法及其弊端,阐述了学者们提出的改进型定点取样方法,并对煤层瓦斯含量测定定点取样方法的研究进行了展望,指出:①取样过程瓦斯损失量小、取样时升温低、机械复杂度低是基于煤芯管法定点取样方法的发展方向;②开展煤储层条件下的瓦斯运移规律研究,建立并完善各种基于煤芯管法的定点取样方法的瓦斯损失量模型;③适用于松软煤层的定点取样方法的研发亟待开展;④基于负压气力输送理论的定点取样方法是定点取样方法研究的趋势,动态颗粒煤变负压瓦斯解吸规律是建立对应瓦斯损失量模型的基础研究。

关 键 词:煤层瓦斯含量  煤芯管法  孔口接样法  定点取样  负压排渣

Sampling methods for coalbed gas content direct determination
ZHANG Hongtu11,2,3,WEI Jianping 1,2,3,WANG Yungang1,2,3,LI Hui1,2,3. Sampling methods for coalbed gas content direct determination[J]. Journal of Safety Science and Technology, 2016, 12(1): 186-192. DOI: 10.11731/j.issn.1673-193x.2016.01.035
Authors:ZHANG Hongtu11  2  3  WEI Jianping 1  2  3  WANG Yungang1  2  3  LI Hui1  2  3
Affiliation:(1.State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, Henan, China;2.School of Safety Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, Henan, China; 3.Coal Production Safety Collaborative Innovation Center in Henan Province,Jiaozuo 454000, Henan, China)
Abstract:The shortages of existing sampling methods for the direct determination of coal seam gas content was analyzed, and the development of sampling methods for the direct determination of coal seam gas content was presented in this review. Some suggestions were provided for the development of sampling methods .The new methods based on the coal tube methods should be aim at decreasing the gas loss content, temperature rising and simplifying the device complexity. Gas transportation laws under coal reservoir conditions should be studied to calculate the gas loss content when sampling with the newly sampling method. The suitable sampling method applied to determination the gas content in the soft coal seam should be developed. Sampling method based on the negative pressure pneumatic conveying was the tendency of the sampling method development, and the gas desorption law under swing-negative pressure and dynamic particle should be studied to model the gas loss content determination during the process of sampling.
Keywords:coal bed gas content  coal tube sampling  positive pressure pneumatic conveying method  sampling method  sampling method based on negative pressure pneumatic conveying
本文献已被 CNKI 等数据库收录!
点击此处可从《中国安全生产科学技术》浏览原始摘要信息
点击此处可从《中国安全生产科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号