Abstract: | A general procedure has been described that can be followed for estimating the cost of reducing air pollution emissions within a metropolitan region. The six step procedure examines emission inventories, regional trends, control trends, alternate control schemes, control costs, and optimum cost-effectiveness. The procedure is illustrated for one emission source in the Delaware Valley. By application of “feasible controls,” automobile emissions were shown to be reduced from 4.5 billion pounds per year in the Region during 1968 to 1.5 billion pounds in the year 2000. Annual control costs during the same period will increase from $30 million to over $300 million per year. This represents a cost increase from $15 per registered vehicle in 1968 to about $58 per vehicle per year in 2000. A method was illustrated for determining minimum cost to achieve any desired degree of emission reduction where alternate feasible control schemes are available. This method is especially useful where the allocation of scarce resources is involved. The general procedure is applicable to any number of pollutants and emission sources, and may be useful for calculations in any metropolitan area. The objectives of the present study are to apply this method to other sources within the Delaware Valley and to determine total regional costs for various levels of emission reduction. As one example of a practical application for this type of analysis, the economic impact of regulatory schemes can be evaluated on a cost-effectiveness basis |