| Abstract: | Recent investigations of ambient aerosol behavior over urban areas have pointed out the need for controlled experimental data to link together field investigation results and computer simulation studies. This paper describes the design considerations, construction details and operating parameters of a large (8000 ft3) outside reaction chamber constructed in rural North Carolina. The chamber is triangular in cross-section, 20 ft wide, 20 ft high and 40 ft long, and is covered with clear 5 ml Teflon film. The outdoor location of the chamber permits the reaction volume to be exposed to the natural conditions of temperature and solar radiation. A recirculating air system allows the air in the chamber to be passed through an “absolute” fiberglas filter for adjustment of condensation nuclei concentration and also through driers for humidity adjustment. Internal fans are provided for mixing of the chamber contents without use of the recirculating system so that various degrees of turbulence can be approximated. A sampling line from the chamber passes directly to an instrument room, located directly under the chamber, where direct analyses for particle composition, concentration, and size, and gas composition and concentration are carried out. Parameters which can be varied in this system include number, size, distribution, and chemical composition of pre-existing nuclei, as well as humidity, solar radiation, temperature, and trace gas concentration and composition. |
