Pinch analysis approach to carbon-constrained planningfor sustainable power generation |
| |
| Authors: | Raymond R Tan Denny Kok Sum Ng Dominic Chwan Yee Foo |
| |
| Institution: | 1. Chemical Engineering Department, De La Salle University, 2401 Taft Avenue, 1004 Manila, Philippines;2. Department of Chemical and Environmental Engineering, University of Nottingham Malaysia, Broga Road, 43500 Semenyih, Selangor, Malaysia;1. Process Systems Engineering Centre (PROSPECT), Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Malaysia;3. Centre of Electrical Energy Systems (CEES), Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia;1. College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China;2. Department of Chemical and Environmental Engineering/Centre of Excellence for Green Technologies, University of Nottingham Malaysia, Broga Road, 43500, Semenyih, Selangor, Malaysia;3. Chemical Engineering Department/Center for Engineering and Sustainable Development Research, De La Salle University, 2401 Taft Avenue, 0922, Manila, Philippines;1. Chemical Engineering Department, De La Salle University, 2401, Taft Avenue 0922, Manila, Philippines;2. Department of Chemical and Environmental Engineering, University of Nottingham Malaysia Campus, Jalan Broga, 43500 Semenyih, Selangor, Malaysia;1. Process Systems Engineering Centre (PROSPECT), Research Institute for Sustainable Environment, Universiti Teknologi Malaysia (UTM), 81310, UTM Johor Bahru, Johor, Malaysia;2. Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia (UTM), 81310, UTM Johor Bahru, Johor, Malaysia;3. Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Práter u. 50/a, 1083 Budapest, Hungary;1. Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India;2. Department of Business Administration, University of Applied Sciences of Thessaly (TEI of Thessaly), Greece;3. Centre of Excellence for Green Technologies, University of Nottingham, Malaysia Campus, Selangor, Malaysia;4. Chemical Engineering Department, De La Salle University, Manila, Philippines |
| |
| Abstract: | A graphical pinch-based methodology for planning retrofits for carbon capture and storage (CCS) in the power generation sector is presented in this work. CCS is widely seen as one of the essential interim technologies to mitigate greenhouse gas emissions, while still being able to utilize fossil fuels, which are relatively inexpensive and reliable in comparison to inherently low-carbon renewable resources. However, retrofitting power plants for CCS entails major capital costs as well as a reduction of thermal efficiency and power output. Thus, it is essential for planning purposes to implement the minimal extent of CCS retrofit that meets the sectoral carbon footprint targets. At the same time, it is necessary to plan for additional power generation capacity or efficiency enhancements to compensate for energy losses resulting from CCS retrofits. The simple graphical approach used in this paper is designed to determine such targets, and shares the same intuitive, insight-driven characteristics of pinch analysis techniques. A case study is shown to illustrate the methodology. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
