Improvement of upflow anaerobic sludge bed performance using chitosan. |
| |
Authors: | Sittpong Lertsittichai Pranee Lertsutthiwong Chantaraporn Phalakornkule |
| |
Institution: | Department of Chemical Engineering, King Mongkut's Institute of Technology, North Bangkok, Thailand. |
| |
Abstract: | Chitosan, with a degree of deacetylation of 85% and a molecular weight of 2.5 x 10(5) Da, yielding high flocculation efficiency (85 to 100% flocculation) and a broad flocculation region (2 to 45 mg/g suspended solids), was selected for accelerating granulation in a 30-L upflow anaerobic sludge bed (UASB) used to treat wastewater from a tropical fruit-processing industry. Compared with other studies, smaller amounts of chitosan were applied (two injections with 2 mg chitosan/g suspended solids in the reactor at each injection). Comparison with the UASB without chitosan addition, the UASB had a 24 to 37% larger particle size and a 6 to 41% longer solids retention time. In addition, the reactor performances were also enhanced. The UASB with chitosan addition had a 9 to 59% lower effluent chemical oxygen demand (COD), 4 to 10% higher COD removal, up to 35% higher biogas production rate, and a 16 to 68% lower biomass washout. The paired t-test analysis indicated that these performance parameters were significantly different (P < 0.05). |
| |
Keywords: | |
|
|