| LY12超塑性成形有限元分析 |
| |
| 引用本文： | 王丽娟,周天瑞,王高潮,包忠诩,肖贡强,熊洪淼. LY12超塑性成形有限元分析[J]. 装备环境工程, 2003, 21(6): 14-16 |
| |
| 作者姓名： | 王丽娟 周天瑞 王高潮 包忠诩 肖贡强 熊洪淼 |
| |
| 作者单位： | 南昌大学机电工程学院，南昌大学机电工程学院，南昌航空工业学院，南昌大学机电工程学院，南昌大学机电工程学院，南昌航空工业学院 江西南昌330029，江西南昌330029，江西南昌330034，江西南昌330029，江西南昌330029，江西南昌330034 |
| |
| 基金项目： | 江西省材料科学与工程研究中心资助项目(ZX200301016) |
| |
| 摘 要： | 基于LY12铝合金超塑性材料属性建立了弹-粘塑性本构模型。利用该本构模型并结合最大等效应变速率控制压力变化算法对LY12铝合金板超塑性圆杯成形进行数值模拟,得到圆杯变形过程中的应力应变分布、板料厚度变化及所需成形时间。根据模拟获得的优化压力时间曲线对圆杯进行超塑性气压胀形加载实验,制件厚度分布与模拟结果非常接近。
|
| 关 键 词： | 超塑性成形 本构关系 有限元 |
| 文章编号： | 1000-8446(2003)06-0014-03 |
| 修稿时间： | 2003-08-11 |
The Finite Element Analysis of LY12 Superplasticity Forming |
| |
| WANG Li-juan,ZHOU Tian-rui,WANG Gao-chao,BAO Zhong-xu,XIAO Gong-qiang,XIONG Hong-miao. The Finite Element Analysis of LY12 Superplasticity Forming[J]. Equipment Environmental Engineering, 2003, 21(6): 14-16 |
| |
| Authors: | WANG Li-juan ZHOU Tian-rui WANG Gao-chao BAO Zhong-xu XIAO Gong-qiang XIONG Hong-miao |
| |
| Affiliation: | WANG Li-juan~1,ZHOU Tian-rui~1,WANG Gao-chao~2,BAO Zhong-xu~1,XIAO Gong-qiang~1,XIONG Hong-miao~2 |
| |
| Abstract: | The paper established a elastic-viscoplastic constitutive modeling which was based on LY12 alloy superplastic material properties. The model that combined the arithmetic which using the max equivalent strain rate to control the change of pressure was used to simulate the cup forming of LY12 alloy. From the finite element analyses of LY12 alloy superplasticity forming, we obtained the stress-strain distribution and thickness evolution across processing and forming time of the cup. According to the optimization pressure-time curve, we carried through a cup superplastic forming experimentation. The experimental result of the thickness distribution of the cup was close to the numerical results. |
| |
| Keywords: | superplastic forming constitutive the finite element method |
| 本文献已被 CNKI 等数据库收录！ |
