Olive mill solid residues as heavy metal sorbent material: a preliminary study

Biosorption of heavy metals is an innovative and alternative technology to remove these pollutants from aqueous solutions using inactive and dead biomasses such as agricultural and industrial wastes, algae and bacteria. In this study olive mill solid residue was used as heavy metal adsorbent material for its wide availability as agricultural waste and also for its cellulosic matrix, rich of potential metal binding active sites. Preliminary studies concerned with the removal of different heavy metals (Hg, Pb, Cu, Zn and Cd), the effect of pre-treatments by water and n-hexane and the regeneration possibility. Olive mill solid residue resulted able to remove heavy metals from aqueous solutions with an affinity series reflecting the hydrolytic properties of the metallic ions, but also a particular affinity for copper. It can be supposed that biosorption phenomenon occur by a general ion exchange mechanism combined with a specific complexation reaction for copper ions. Water pre-treatment is sufficient to reduce COD release in the effluent according to the law limit, while n-hexane pre-treatment strongly reduces also the adsorption properties of this material. Experimental isotherms obtained under different operating conditions were fitted using a non linear regression method for the estimation of the Langmuir parameters. Moreover a simple Scatchard plot analysis was performed for a preliminary investigation of the active sites, showing the presence of two different site affinities depending on the metal concentration, according to the previous hypothesis of two kinds of uptake mechanisms for copper biosorption. Regeneration tests gave good results in terms of yield of regeneration and also concentration ratios.