Effects of ionic strength and temperature on adsorption of atrazine by a heat treated kerolite

The adsorption of 6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine (atrazine) on a heat treated kerolite sample at 600 degrees C (K-600) from pure water solution at 10 degrees C, 25 degrees C and 40 degrees C has been studied. The influence of the presence of 0.1 M KCl in the medium was also investigated for a better understanding of variables affecting the adsorption of this herbicide. The experimental adsorption data points were fitted to the Langmuir equation in order to calculate the adsorption capacities (Xm) of the samples; Xm values range from 2.3x10(3) mg kg-1 (pure water solution at 40 degrees C) up to 15.2x10(3) mg kg-1 (0.1 M KCl solution at 10 degrees C). The adsorption data were also fitted to the Freundlich equation in order to clarify the influence of the presence of 0.1 M KCl on atrazine adsorption. The parameter K10 obtained from this equation (adsorption capacity at an equilibrium solution concentration of atrazine equal to 10 mg l-1) shows clearly that the presence of 0.1 M KCl in the medium tends to increase the adsorption of atrazine in the range of temperature studied. The adsorption experiment also showed that the lower temperature, the more effective the adsorption of atrazine from both, pure water and 0.1 M KCl solutions. The values of the removal efficiency (R) obtained ranged from 39% at 40 degrees C (pure water solution) up to 93% at 10 degrees C (0.1 M KCl solution).