Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption |
| |
| Authors: | William Tongamp Junya Kano Yuichiro Suzuta Fumio Saito Nickolas J. Themelis |
| |
| Affiliation: | (1) Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-Ku, Sendai 980-8577, Japan;(2) Earth Engineering Center, Columbia University, New York, USA |
| |
| Abstract: | A sample of polyvinyl chloride (PVC) powder was milled with CaO powder in a planetary mill for various mill operational parameters. The milled product consisted of dechlorinated hydrocarbon and water-soluble CaOHCl. The dechlorination rate of PVC was determined by the concentration of Cl− ions measured in solution after dispersing the milled product in water. To evaluate the power consumption during PVC dechlorination, the mill power consumption was measured during each experimental run. In addition, media motion during planetary milling was simulated using the discrete element method (DEM), enabling calculation of the mill power consumption. The power consumption calculated by the DEM simulation compared well with the power consumption measured experimentally. The dechlorination rate correlated well with the specific mill power consumption, regardless of the sample weight. The dechlorination rate of PVC when milled with oyster shells (CaCO3) was observed to be faster than that of the PVC/CaO system, and oyster shells could be used as a reactant for the treatment of PVC wastes. This work should be useful for the design of a reactor for the dechlorination of PVC. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6 |
| |
| Keywords: | Mechanochemical dechlorination Polyvinyl chloride Power consumption DEM simulation Milling |
| 本文献已被 SpringerLink 等数据库收录！ |
|
