首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超滤膜结构参数特性的分析研究
引用本文:段文松,王振中.超滤膜结构参数特性的分析研究[J].江苏环境科技,2007,20(2):9-11.
作者姓名:段文松  王振中
作者单位:1. 安徽师范大学环境科学学院,安徽,芜湖,241000
2. 浙川县公路管理局,河南,浙川,474450
基金项目:安徽省高校青年教师科研项目
摘    要:用电镜法和渗透率法对PVDF-300超滤膜表面的孔径分布、孔隙率以及膜孔密度等结构参数进行了测定.结果表明,用扫描电镜法和场发射扫描电镜法测定膜平均孔径及膜孔密度等结构参数是比较吻合的.从而可以根据膜结构参数在透水过程中的变化规律研究膜污染的机理,为以后建立以膜结构参数为参数的膜污染模型奠定了理论基础.

关 键 词:扫描电镜  渗透率法  膜孔密度  孔径分布  超滤膜结构  参数特性  分析  研究  Parameters  Configuration  ultrafiltration  Membrane  理论  膜污染模型  机理  变化规律  水过程  膜结构参数  比较  平均孔径  扫描电镜法  结果  测定  膜孔密度  孔隙率
文章编号:1004-8642(2007)02-0009-03
收稿时间:2007-01-07
修稿时间:2007-01-07

Study on ultrafiltration Membrane Configuration Parameters
DUAN Wen-song,WANG Zhen-zhong.Study on ultrafiltration Membrane Configuration Parameters[J].Jiangsu Environmental Science and Technology,2007,20(2):9-11.
Authors:DUAN Wen-song  WANG Zhen-zhong
Abstract:This study adopts the scanning electron microscope(SEM), the field emission scanning electron microscope (FESEM) and permeability rate method to determine ultrafiltration membrane (PVDF-300) configuration parameters such as surface pore size distribution, porosity, pore density and so on. The results show that the data of pore density obtained from SEM and FESEM are basically consistent. This study establishes a model between permeation flux and membrane parameters including mean pore size and pore density
Keywords:Scanning electron microscope  Permeability rate method  Membrane pore density  Pore distribution
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号