首页 | 本学科首页   官方微博 | 高级检索  
     检索      

应力波在预应力锚杆内传播特性分析与工程应用
引用本文:李青锋,谢雄刚,朱川曲.应力波在预应力锚杆内传播特性分析与工程应用[J].中国安全科学学报,2007,17(10):172-175.
作者姓名:李青锋  谢雄刚  朱川曲
作者单位:1. 湖南科技大学能源与安全工程学院,湘潭,411201
2. 湖南工学院安全与环境工程系,衡阳,421008
基金项目:国家重点基础研究发展计划(973计划);国家自然科学基金
摘    要:针对煤矿锚杆支护的特点,首先从理论上研究应力波在托板处、锚固开始位置、锚固结束位置的反射和透射规律;然后模拟纵波在全长锚固锚杆内传播速度与树脂-围岩粘结刚度之间的关系;最后在锚杆支护实验室进行了预应力锚杆支护实测对比试验。研究结果表明,应力波反射法不仅可以检测锚杆的锚固位置和锚固长度,而且能由锚固体波速间接检测锚杆的锚固力大小。

关 键 词:预应力锚杆  应力波  传播特性  粘结刚度  数值模拟
文章编号:1003-3033(2007)10-0172-04
收稿时间:2007-04-23
修稿时间:2007-09-30

Analysis on Propagation Characteristics of Stress Wave in Pre-stressed Bolt and Its Engineering Application
LI Qing-feng,XIE Xiong-gang,ZHU Chuan-qu.Analysis on Propagation Characteristics of Stress Wave in Pre-stressed Bolt and Its Engineering Application[J].China Safety Science Journal,2007,17(10):172-175.
Authors:LI Qing-feng  XIE Xiong-gang  ZHU Chuan-qu
Abstract:In view of the characteristics of bolt supporting in mine, the reflection and transmission law of stress wave at the initial anchorage position, terminal anchorage position and splint are investigated in theory. Secondly, the relation between longitudinal wave propagation velocity and resin-bonded stiffness of full length anchoring bolt is simulated. Finally, comparative tests for anchoring quality of anchor cables are conducted in bolt supporting laboratory. Research shows that stress wave reflection method can not only detect the anchoring position and anchoring length, but also indirectly detect the bolt anchoring force through anchor wave velocity.
Keywords:pre-stressed bolt  stress wave  propagation characteristics  resin-bonded stiffness  numerical simulation
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号