Experimental investigation of the e ect of flow turbulence and sediment transport patterns on the adsorption of cadmium ions onto sediment particles

The mechanism of flow turbulence,sediment supply conditions,and sediment transport patterns that affect the adsorption of cadmiumions onto sediment particles in natural waters are experimentally simulated and studied both in batch reactors and in a turbulencesimulation tank.By changing the agitation conditions,the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment.It is found that the adsorption rate of bottom sediment is much lessthan that of suspended sediment,but the sediment transport pattern does not affect the final(equilibrium)concentration of dissolvedcadmium.This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern.Inthe turbulence simulation tank,the turbulence is generated by harmonic grid-stirred motions,and the turbulence intensity is quantifiedin terms of eddy diffusivity,which is equal to 9.84F(F is the harmonic vibration frequency)and is comparable to natural surfacewater conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment,the adsorption rateis significantly low,and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of theexperiment.This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in naturalrivers.When the turbulence intensity is high but bottom sediment persists,the rate and extent of descent of the dissolved cadmiumconcentration in the tank noticeably increase,and the time that is required to reach adsorption equilibrium also increases considerablydue to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results ofthe experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of the sediment,andin particular the adsorption rate,is greatly over-estimated in the batch reactor.