Impacts of feedlot floor condition,deposition frequency,and inhibitors on N2O and CH4 emissions from feedlot dung and urine patches

Patches of dung and urine are major contributors to the feedlot gas emissions. This study investigated the impacts of dung deposition frequency (partly reflecting animal stocking density of a feedlot), dairy feedlot floor conditions (old floor indicated with the presence of consolidated manure pad CMP] vs. new floor with the absence of consolidated manure pad CMPn]), and application of dicyandiamide (DCD) and hydroquinone (HQ) on nitrous oxide (N₂O) and methane (CH₄) emissions from patches in the laboratory, and the integrative impacts were expressed in terms of global warming potential (CO₂-equivalent). Dung deposition frequency, feedlot floor condition, and application of inhibitors showed inverse impacts on N₂O and CH₄ emissions from patches. Greenhouse gas (GHG) emissions from the dung, urine, and dung+urine patches on the CMP feedlot surface were approximately 7.48, 87.35, and 7.10 times those on the CMPn feedlot surface (P < 0.05). Meanwhile, GHG emissions from CMP and CMPn feedlot surfaces under high deposition frequency condition were approximately 10 and 1.7 times those under low-frequency condition. Moreover, application of HQ slightly reduced the GHG emission from urine patches, by 14.9% (P > 0.05), while applying DCD or DCD+HQ significantly reduced the GHG, by 60.3% and 65.0%, respectively (P < 0.05). Overall, it is necessary to include feedlot management such as animal stocking density and feedlot floor condition to the process of determining emission factors for feedlots. In the future, field measurements to quantitatively evaluate the relative contribution of nitrification and denitrification to the N₂O emissions of feedlot surfaces are highly required for effective N₂O control.

Implications: This study shows that feedlot CH₄ and N₂O emissions inversely respond to the dicyandiamide (DCD) application. Applying DCD significantly reduces GHG emissions of feedlot urine patches. Feedlot floor condition and stocking density strongly impact feedlot GHG emissions. Including feedlot floor condition and stocking density in the feedlot EF determining process is necessary.