| 辉光离子氮化对马氏体不锈钢性能的影响 |
| |
| 引用本文： | 王静巍.辉光离子氮化对马氏体不锈钢性能的影响[J].装备环境工程,2002,20(1):43-45. |
| |
| 作者姓名： | 王静巍 |
| |
| 作者单位： | 辽阳石油化工高等专科学校机械系 辽宁辽阳111003 |
| |
| 摘 要： | 对 1Crl3马氏体不锈钢进行了辉光离子氮化处理试验 ,并对氮化试样的金相和硬度进行了分析测定。结果表明 5 2 0℃辉光离子氮化 8h ,使 1Crl3马氏体不锈钢的氮化层深度达到 0 .2 5mm ,最高硬度达到HV732 ,约为基体硬度的 4倍。
|
| 关 键 词： | 不锈钢 耐磨性 硬度 辉光离子氮化 |
| 文章编号： | 1000-8446(2002)01-0043-03 |
| 修稿时间： | 2001年9月13日 |
The Effect of Glow Discharge Nitriding to the Properties of Martensitic Stainlees Steel |
| |
| WANG Jing,wei.The Effect of Glow Discharge Nitriding to the Properties of Martensitic Stainlees Steel[J].Equipment Environmental Engineering,2002,20(1):43-45. |
| |
| Authors: | WANG Jing wei |
| |
| Abstract: | Cr12 martensitic stainless steel was treated by means of glow discharge nitriding.The specimens were analyzed and tested.The results indicated that the depth and the hardness of the nitration case was approximately 0.25mm and HV732(almost 4 times as much as the hardness of the matrix) respectively. |
| |
| Keywords: | stainless steel friction resistance hardness glow discharge nitriding |
| 本文献已被 CNKI 等数据库收录！ |
