Agro-industry sugarcane residues disposal: the trends of their conversion into energy carriers in Cuba

The goal of the present work was to carry out a review of the disposal practices for the agro-industry's sugarcane residue and the trends of energy use in Cuba. The lack of an alternative energy carrier to electricity with storage capability for use in off-season has to date been an unsolvable question. The improvement of cogeneration capacity via implementation of CEST or BIG/GTCC and the barriers for their implementation, the introduction of a medium size (3 ton/h) fast pyrolysis module (FPM3) as a solution for off-season energy demand in the agro-industry, and an assessment of the energy required to do so, were also analyzed. Bio-oil production from bagasse and sugarcane agriculture residues (SCAR) and their particularities at the sugar mill are treated. The influence of sugar facility production process configuration is analyzed. The fast pyrolysis products and the trends of their end uses in Cuba are presented. The production cost of a ton of Bio-oil for FPM3 conditions was calculated at 155 USD/ton and the payback time as a function of selling price between 160 and 110 USD/ton was estimated to be from 1.5 to 4 years. The economic feasibility of the FPM3 was estimated, comparing the added values for three scenarios: 1st case, currently-used sugar production, 16.5 USD/ton of cane; 2nd case, factoring in the cogeneration improvement, 27 USD/ton of cane; and 3rd case, with cogeneration improvement and Bio-oil production, 40 USD/ton of cane. The energy use of SCAR and the introduction of FPM3 in the sugar mill are promising improvements that could result in a potential surplus of 80 kWh(e)/ton of cane in-season, or 6 x 10(6)ton of Bio-oil (LHV=15 MJ/kg) for use off-season in a milling season of 4 million tons of raw sugar.