The Impact of Scrubber Sludge on Ground Water Quality at an Abandoned Mine Site

A sulfate-rich flue gas desulfurization scrubber sludge was used as a substitute backfill material in reclamation of an abandoned coal strip mine. The site was surrounded by monitor wells and the material was characterized for leaching behavior using open column experiments. A drain was placed directly beneath the 45 000 ton fill to enable sampling before dilution or attenuation. The column studies indicated that the scrubber sludge would adsorb manganese, iron, aluminium, cobalt, nickel, thallium and zinc contaminants from the water. Changes in pH appear inadequate to explain the removal by precipitation. The groundwater cleaning phenomenon has been confirmed on a field scale by the drain samples. Boron and molybdenum leach from the fly ash was used to fix the scrubber sludge and serve as marker elements enabling calibration of the dispersivity in computer models of the groundwater system at the site. The leachate front appears to be diluted by a factor of 8 : 1 within the first 15 meters. Since boron and molybdenum release are associated only with the first flush, environmental impacts will be minimal. Columns appear to create a time compression effect on the duration of leaching phenomenon. The effect for this site appears to be at least 5 : 1. The columns were effective in predicting which elements would leach or adsorb in the field and in predicting the actual source concentrations. Other shake tests such as the TCLP and the ASTM shake test were found to be less effective at predicting which elements would leach and were not helpful in predicting field concentrations.