|
|||||
|
|
| 包埋厌氧氨氧化菌的环境因子影响特性及群落结构分析 | |
| 引用本文： | 王晓曈,杨宏,苏杨,刘旭妍. 包埋厌氧氨氧化菌的环境因子影响特性及群落结构分析[J]. 环境科学, 2020, 41(2): 839-848. DOI: 10.13227/j.hjkx.201908157 |
| 作者姓名： | 王晓曈 杨宏 苏杨 刘旭妍 |
| 作者单位： | 北京工业大学建筑工程学院,北京市水质科学与水环境恢复工程重点实验室,北京 100124,北京工业大学建筑工程学院,北京市水质科学与水环境恢复工程重点实验室,北京 100124,北京工业大学建筑工程学院,北京市水质科学与水环境恢复工程重点实验室,北京 100124,北京工业大学建筑工程学院,北京市水质科学与水环境恢复工程重点实验室,北京 100124 |
| 基金项目： | 中央引导地方科技发展专项 |
| 摘 要： | 针对厌氧氨氧化菌悬浮培养启动慢、易流失、活性易受环境因子抑制等问题,利用聚乙烯醇-聚丙烯(PVA-PP)制备厌氧氨氧化菌包埋填料,在实现厌氧氨氧化菌活性提高及反应体系稳定运行的基础上,采用批次实验明确了COD干扰、pH值变化及摇床转速对包埋填料脱氮特性的影响.并通过高通量测序技术分析了填料内菌群结构和多样性的变化.结果表明,厌氧氨氧化菌活性可在第30 d恢复至100%,阶段培养99 d,总氮容积负荷(NLR)为0. 69 kg·(m3·d)-1时,总氮去除率为87. 7%,140 d长期运行,总氮去除速率(NRR)可达1. 83 kg·(m3·d)-1,是包埋前悬浮污泥的9. 4倍.种群多样性在包埋载体内得到保持,厌氧氨氧化功能菌Candidatus Kuenenia(AF375995. 1)有效富集,占比由11. 06%上升至32. 55%. PVA-PP包埋载体可实现厌氧氨氧化-反硝化耦合脱氮,有机碳源干扰及pH值的变化对厌氧氨氧化菌影响抑制明显减弱,并且摇床转速的适当提高会促进包埋体系厌氧氨氧... |
| 关 键 词： | 厌氧氨氧化(ANAMMOX) 包埋 聚乙烯醇-聚丙烯(PVA-PP) 脱氮特性 微生物群落结构 |
| 收稿时间： | 2019-08-19 |
| 修稿时间： | 2019-09-16 |
Environmental Factors Influence and Microbial Community Structure Analysis of Entrapped Anaerobic Ammonium Oxidizing Bacteria |
|
| WANG Xiao-tong,YANG Hong,SU Yang and LIU Xu-yan. Environmental Factors Influence and Microbial Community Structure Analysis of Entrapped Anaerobic Ammonium Oxidizing Bacteria[J]. Chinese Journal of Environmental Science, 2020, 41(2): 839-848. DOI: 10.13227/j.hjkx.201908157 | |
| Authors: | WANG Xiao-tong YANG Hong SU Yang LIU Xu-yan |
| Affiliation: | Key Laboratory of Beijing for Water Quality Science and Water Environment Recovery Engineering, College of Architectural Engineering, Beijing University of Technology, Beijing 100124, China,Key Laboratory of Beijing for Water Quality Science and Water Environment Recovery Engineering, College of Architectural Engineering, Beijing University of Technology, Beijing 100124, China,Key Laboratory of Beijing for Water Quality Science and Water Environment Recovery Engineering, College of Architectural Engineering, Beijing University of Technology, Beijing 100124, China and Key Laboratory of Beijing for Water Quality Science and Water Environment Recovery Engineering, College of Architectural Engineering, Beijing University of Technology, Beijing 100124, China |
| Abstract: | To solve the problems of a slow start, easy loss, and easily inhibited activity of the Anammox bacteria suspension culture, polyvinyl alcohol-polypropylene (PVA-PP) was used to prepare the Anammox immobilized filler. To improve the activity of Anammox bacteria and ensure stable operation of the reaction system, the effects of COD interference, change in pH value, and rotating speed on the nitrogen removal characteristics of the immobilized filler were determined in batch tests. Changes in the structure and diversity of the bacteria in the filler were analyzed by a high-throughput sequencing technique. The results showed that the activity of Anammox bacteria could recover to 100% on the 30th day, and the total nitrogen removal rate was 87.7% when the total nitrogen volume load (NLR) was 0.69 kg·(m3·d)-1 at the stage of 99 days. After 140 days of long-term operation, the total nitrogen removal rate (NRR) reached 1.83 kg·(m3·d)-1, which was 9.4 times the suspended sludge before immobilization. The diversity of the population was maintained in the inclusion carrier, and the effective enrichment of Candidatus Kuenenia (AF375995.1), which performs anaerobic ammonia-oxidization, increased from 11.06% to 32.55%. The influence of COD interference and changes in the pH value of Anammox bacteria was significantly weakened, and the PVA-PP entrapped carrier could achieve the coupling removal of nitrogen by Anammox and denitrification. Appropriate external hydraulic disturbance would promote the Anammox reaction in immobilized systems. |
| Keywords: | anaerobic ammonia oxidizing(ANAMMOX) immobilization polyvinyl alcohol-polypropylene (PVA-PP) nitrogen removal characteristics microbial community structure |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《环境科学》浏览原始摘要信息 | |
| 点击此处可从《环境科学》下载全文 | |