首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SBR法反硝化过程模糊控制器的设计和碳源投加方式的选择
引用本文:高景峰,彭永臻,王淑莹.SBR法反硝化过程模糊控制器的设计和碳源投加方式的选择[J].环境科学学报,2003,23(6):733-737.
作者姓名:高景峰  彭永臻  王淑莹
作者单位:北京工业大学环境与能源工程学院,北京,100022
基金项目:国家自然科学基金重点资助项目 ( 50 13 80 10 ),北京市自然科学基金项目 ( 80 0 2 0 0 5)
摘    要:在大量试验的基础上构建了SBR法反硝化过程的模糊控制器,并进行了3种碳源投加方式的实时控制试验。结果表明,按较小的速率连续投加碳源是最佳投加方式,它不仅可以满足反硝化速率上的要求,还可以尽量地减少再曝气时间,以pH和ORP作为SBR法反硝化时间和碳源投加的在线模糊控制参数是可行的和可靠的。

关 键 词:SBR法  反硝化  模糊控制  设备设计  碳源投加方式  污水处理  生物处理
文章编号:0253-2468(2003)06-0733-05
收稿时间:2002/10/14 0:00:00
修稿时间:2002年10月14

The construction of fuzzy controller of denitrification in SBR process and the choice of carbon addition method
GAO Jingfeng,PENG Yongzhen and WANG Shuying.The construction of fuzzy controller of denitrification in SBR process and the choice of carbon addition method[J].Acta Scientiae Circumstantiae,2003,23(6):733-737.
Authors:GAO Jingfeng  PENG Yongzhen and WANG Shuying
Institution:College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100022,College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100022 and College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100022
Abstract:On the basis of the fundamental experiments, the fuzzy controller of denitrification in SBR was constructed, and the on-line fuzzy control experiments comparing three methods of carbon addition were carried out. The results showed a continuous carbon addition at a low rate was the best method, as it can not only give higher denitrification rate but also reduce the re-aeration time as much as possible. It appeared promising that pH and ORP were used as fuzzy control parameters to control the denitrification time and the carbon addition.
Keywords:fuzzy control  SBR  denitrification  carbon addition method  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《环境科学学报》浏览原始摘要信息
点击此处可从《环境科学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号