| 优化热脱附技术对十溴联苯醚污染土壤的适用性及修复效果 |
| |
| 引用本文： | 朱腾飞,赵龙,张琪,秦晓鹏,侯红.优化热脱附技术对十溴联苯醚污染土壤的适用性及修复效果[J].环境科学研究,2016,29(2):262-270. |
| |
| 作者姓名： | 朱腾飞 赵龙 张琪 秦晓鹏 侯红 |
| |
| 作者单位： | 1.华东理工大学化工学院, 上海 200237 ;中国环境科学研究院, 环境基准与风险评估国家重点实验室, 北京 100012 |
| |
| 基金项目： | 国家自然科学基金青年科学基金项目(41301342) |
| |
| 摘 要： | 为了探索绿色、高效、环保的修复PBDEs污染土壤的技术,在热脱附技术基础上将木炭同时作为尾气吸附剂和燃烧热源,处理不同十溴联苯醚污染水平的PBDEs(多溴联苯醚)污染土壤,通过14种不同溴代PBDEs同系物分析十溴联苯醚的降解产物组分并计算其去除率. 结果表明:在热脱附技术处理后,十溴联苯醚初始污染水平分别为500、800和1 000 μg/kg,污染土壤中PBDEs的去除率分别为63%、81%、94%. 14种不同溴代PBDEs同系物在热脱附反应后的残留产物中均有检出,其中热脱附处理后的土壤中以三溴和四溴PBDEs产物占优势,而尾气中则以四溴和五溴PBDEs产物为主. 根据热脱附试验前后土壤中PBDEs的结构组成对比及分析可知,降解和脱溴反应在整个热脱附反应过程中发挥了重要作用. 另外,XAD树脂吸附柱中虽有少量的氯代和溴代二英类物质(PCDD/Fs和PBDD/Fs)被检出,但其毒性当量浓度均小于0.1 ng/m3,符合欧盟、日本及我国所规定的二英物质排放标准. 研究显示,在利用优化的热脱附技术修复十溴联苯醚污染土壤过程中,PBDEs的去除率与污染土壤中其污染水平相关,并且热脱附过程以降解及逐级脱溴反应为主.
|
| 关 键 词： | 优化的热脱附 多溴联苯醚 去除率 降解产物 木炭 |
| 收稿时间： | 2015/9/11 0:00:00 |
| 修稿时间： | 2015/11/1 0:00:00 |
Adaptability and Remediation Effect of Decabromodiphenyl Ether-Contaminated Soil Using Optimized Thermal Desorption |
| |
| ZHU Tengfei,ZHAO Long,ZHANG Qi,QIN Xiaopeng and HOU Hong.Adaptability and Remediation Effect of Decabromodiphenyl Ether-Contaminated Soil Using Optimized Thermal Desorption[J].Research of Environmental Sciences,2016,29(2):262-270. |
| |
| Authors: | ZHU Tengfei ZHAO Long ZHANG Qi QIN Xiaopeng and HOU Hong |
| |
| Affiliation: | 1.School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China ;State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China2.State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China3.School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China |
| |
| Abstract: | In order to investigate a green, highly efficient and environmentally-friendly technology for remediation of decabromodiphenyl ether-contaminated soils, charcoal was used as both the effluent adsorption and thermal source in the treatment process of decabromodiphenyl ether-contaminated soils on the basis of conventional thermal desorption technology, in order to analyze the decomposition products and removal rate of decabromodiphenyl ether through identifying the 14 kinds of PBDEs isomers. The results showed that the removal rates for three different initial concentrations of 500,0 and 1000 μg/kg of contaminated soils were 63%, 81% and 94%, respectively, after the thermal desorption technology was applied. Fourteen kinds of PBDEs components were detected in the residue products after the thermal desorption process. Among the PBDEs isomers, the concentrations of Tri-BDE and Tetra-BDE were much higher than those in the treated soils, whereas the concentrations of Tetra-BDE and Penta-BDE were predominant in the effluent gas. In terms of the components' comparison and analysis of PBDEs in soils before and after the thermal treatments, degradation and debromination reactions played an important role in the whole process of thermal desorption. Furthermore, although a small number of dioxins, including PCDD/Fs and PBDD/Fs, were detected in the XAD adsorption resin from effluent gas, TEQ values were uniformly less than 0.1 ng/m3, which complied with the emission limit standard values of EC, Japan and China. The results showed that the removal rate of PBDEs was related to the initial concentrations of contaminated soils, and the degradation reactions and stepwise debromination predominated in the treatment process using the thermal desorption. |
| |
| Keywords: | novel thermal desorption polybrominated diphenyl ethers removal rate decomposition product charcoal |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《环境科学研究》浏览原始摘要信息 |
|
点击此处可从《环境科学研究》下载全文 |
|
