聚丙烯基高分子功能材料吸附卷烟烟气中多种有害成分的应用

为了寻找能同时降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的离子交换树脂吸附材料,采用电镜扫描方法观察聚丙烯基阳离子树脂高分子功能材料的表面特征,应用压汞法分析其平均孔径、中值孔径、比孔容和比表面积,并测试了该材料的交换容量,采用环境试验舱检测法对比测试了该材料和活性炭降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的效果.结果表明,聚丙烯基高分子功能材料表面多斑点状突起,凹凸状明显,微孔和缝隙多,平均孔径为0.26 μm,中值孔径为149.3 μm,比孔容为19.23 cm3/g,比表面积为293.42 m2/g,交换容量为5.16 mmol/g,对烟气中甲醛、乙醛、巴豆醛和颗粒物的净化率分别达到79.6％、79.8％、82.8％和64.7％,而活性炭的净化率分别为20.3％、0、6.4％和54.2％.研究表明,该聚丙烯基高分子功能材料具有物理吸附和化学吸附性能,净化卷烟烟气中多种有害成分的效果明显优于活性炭.     

蚯蚓-稻壳炭联合堆肥对工业污泥中重金属的影响研究

蚯蚓堆肥相关研究多集中在生活污泥方面,对工业污泥的探索较少。该研究以马鞍山某钢铁污水处理站污泥为例,添加不同比例稻壳炭(2%、4%、8%),设置污泥单独堆肥、稻壳炭与污泥堆肥以及蚯蚓-稻壳炭联合污泥堆肥试验,探索蚯蚓与稻壳炭联合堆肥对工业污泥中重金属形态和生物有效性的影响。研究表明,(1)相比污泥单独堆肥,稻壳炭联合污泥堆肥能增加污泥pH、EC、TP和降低TOC、TN,而蚯蚓联合稻壳炭堆肥污泥可增加TN,并进一步增加污泥EC、TP,显著降低污泥的pH、TOC。(2)稻壳炭堆肥中重金属Zn、Cu、Pb、Cd含量因浓缩效应而上升;而蚯蚓联合稻壳炭堆肥,重金属含量显著下降,添加4%稻壳炭时,重金属Zn、Cu、Pb、Cd质量分数达到最小值,分别为856.64、137.10、158.92、15.48mg·kg-1。(3)重金属形态分析表明,随着稻壳炭比例增加,稻壳炭堆肥中重金属Zn、Cu、Pb、Cd的交换态和碳酸盐结合态转化为残渣态及铁锰氧化态的比例增大,添加8%稻壳炭时DTPA提取的有效态重金属质量分数最低,分别为705.72、47.95、50.43、4.47 mg·kg-1;蚯蚓-稻壳炭联合堆肥会使得污泥中重金属交换态、碳酸盐结合态、铁锰结合态和有机结合态均向残渣态转化,添加4%稻壳炭与蚯蚓的协同转化能力最大,Zn、Cu、Pb、Cd有效态重金属质量分数分别为629.84、38.63、36.76、1.63mg·kg-1,说明稻壳炭添加入蚯蚓堆肥可进一步降低工业污泥中重金属有效性,使重金属钝化。本研究可为稻壳炭联合蚯蚓堆肥处理工业污泥提供参考和科学依据。     

牛骨炭对水溶液中Hg（Ⅱ）吸附性的研究

以牛骨为原料，氯化锌为活化剂制备牛骨基炭，通过静态吸附试验研究了牛骨炭对水中Hg（Ⅱ）的吸附效果并确定了影响吸附性能的因素。研究结果表明：牛骨炭对Hg（Ⅱ）的最佳吸附时间约为2h、吸附温度为25℃、pH值为1、投加量为0．1g、吸附溶液的最大初始浓度为600mg／L，其最大吸附容量Q^0为43．1mg／g，吸附行为符合Freundl—ich吸附等温模型；通过BET分析和扫描电镜（SEM）等手段表征了牛骨炭的孔结构参数及形貌特征，经分析，所制备牛骨炭的孔径分布为中孔。     

竹炭-微生物联合法对沼液中氨氮的去除

采用竹炭-微生物联合法,考察了竹炭用量、菌液用量、进水氨氮浓度、pH、DO、HRT等因素对氨氮废水处理效果的影响;同时采用对比实验,初步探讨了竹炭-微生物联合法处理沼液的作用机理。结果表明,竹炭-微生物法去除沼液氨氮的最优条件推荐为:竹炭用量30 g/L,微生物活性液用量3%,pH 7.0～8.0,DO为2 mg/L,HRT为48 h。竹炭-微生物法对沼液氨氮的去除过程可用一级反应动力学模型C=272.56e-0.0148描述,其去除效果来源于竹炭吸附和生物降解的协同作用,协同程度为48.45%。     

Diffusion mechanism of lindane into wood charcoal

Abstract

The wood charcoal treated by 1N HNO₃ (WCT) was used to remove toxic chlorinated pesticide lindane (y‐HCH) residue from water by the sorption process. Using a simple first order reversible kinetics constants and half time equations, the film and pore diffusion coefficients were determined. Film diffusion was found to be rate limiting step in sorbing lindane by WCT. This was further authenticated by kinetics studies at different initial sorbate concentrations, different sorbent sizes, and different agitation speeds besides interruption test. A pore diffusion model was used to fit the data of kinetics in continuously mixed batch reactors (CMBR), and the tortuosity, external resistance, and surface diffusion effects on lindane sorption by WCT were noticed. The tortuosity values of 15 to 28 were obtained for WCT‐lindane system.     

活性炭对两种生物染料脱色效果的实验研究

以颗粒状活性炭为吸附载体,对两种单体生物染料进行脱色吸附实验研究。通过实验确定出最佳优化条件：活性炭用量80g/L,溶液pH值约为5、5,溶液最佳温度为35℃,搅拌速度为150rpm／min,此时染料脱色率可达98％以上;在几种条件实验过程中,将两种染料进行对比发现：红色染料脱色率一般都比绿色染料脱色率高,而且前者一般比后者反应较敏感。同时,从活性炭的表面结构方面探讨吸附脱色机理,为活性炭深度处理印染废水的研究可提供一定的科学依据。     

臭氧氧化自来水生物稳定性研究

采用可同化有机碳研究某石化地区臭氧氧化自来水的生物稳定性。结果表明,地下水原水ＡＯＣ含量为４１３μｇ／Ｌ,不仅有生物稳定性,水源遭到有机物污染。     

竹炭对微污染水中有机污染物的吸附

测定了竹炭对微污染水源水中CODMn,UV254,UV410的去除效果,研究了竹炭粒径、竹炭用量、吸附时间、溶液pH值对竹炭吸附特性的影响,并由正交试验确定出竹炭去除水中CODMn,UV254,UV410的最佳吸附条件。研究表明,粒径越小,竹炭的吸附效果越好;竹炭用量为100mg、吸附时间为1h时,竹炭对各指标去除率最高;弱酸条件对竹炭对各指标的吸附最有利,当pH值=4时竹炭对各指标的去除率最大;正交试验确定出动态吸附最佳操作条件为：竹炭粒径为100～200目,质量为100mg,振荡吸附1h,原水pH值为4。     

Interaction mechanisms of organic contaminants with burned straw ash charcoal

Black carbons(e.g.,charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affnity and ubiquity in the environment.To further elucidate their interaction mechanism,sorption of polar(p-nitrotoluene,m-dinitrobenzene and nitrobenzene) and nonpolar(naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated.The sorption isotherms fitted well with Freundlich equation,and the Freundlich N values were all around 0.31-0.38,being independent of the sorbate properties and sorbent types.After sequential removal of ashes by acid treatments(HCl and HCl-HF) ,both adsorption and partition were enhanced due to the enrichment of charcoal component.The separated contribution of adsorption and partition to total sorption were quantified.The effective carbon content in ash charcoal functioned as adsorption sites,partition phases,and hybrid regions with adsorption and partition were conceptualized and calculated.The hybrid regions increased obviously after de-ashed treatment.The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar(the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures(100-850°C) ,10 kinds of precursors of charcoal/biochar,and 10 organic sorbates.     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.