Modeling Agricultural Nonpoint Source Pollution Using a Geographic Information System Approach

Agricultural non-point source (NPS) pollution, primarily sediment and nutrients, is the leading source of water-quality impacts to surface waters in North America. The overall goal of this study was to develop geographic information system (GIS) protocols to facilitate the spatial and temporal modeling of changes in soils, hydrology, and land-cover change at the watershed scale. In the first part of this article, we describe the use of GIS to spatially integrate watershed scale data on soil erodibility, land use, and runoff for the assessment of potential source areas within an intensively agricultural watershed. The agricultural non-point source pollution (AGNPS) model was used in the Muddy Creek, Ontario, watershed to evaluate the effectiveness of management strategies in decreasing sediment and nutrient [phosphorus (P)] pollution. This analysis was accompanied by the measurement of water-quality parameters (dissolved oxygen, pH, hardness, alkalinity, and turbidity) as well as sediment and P loadings to the creek. Practices aimed at increasing year-round soil cover would be most effective in decreasing sediment and P losses in this watershed. In the second part of this article, we describe a method for characterizing land-cover change in a dynamic urban fringe watershed. The GIS method we developed for the Blackberry Creek, Illinois, watershed will allow us to better account for temporal changes in land use, specifically corn and soybean cover, on an annual basis and to improve on the modeling of watershed processes shown for the Muddy Creek watershed. Our model can be used at different levels of planning with minimal data preprocessing, easily accessible data, and adjustable output scales.     

BMP IMPACTS ON WATERSHED RUNOFF,SEDIMENT, AND NUTRIENT YIELDS1

ABSTRACT: To quantify the effectiveness of best management practice (BMP) implementation on runoff, sediment, and nutrient yields from a watershed, the Nomini Creek watershed and water quality monitoring project was initiated in 1985, in Westmoreland County, Virginia. The changes in nonpoint source (NPS) loadings resulting from BMPs were evaluated by comparing selected parameters from data series obtained before, during, and after periods of BMP implementation. The results indicated that the watershed-averaged curve number, sediment, and nutrient (N and P) concentrations were reduced by approximately 5, 20, and 40 percent, respectively, due to BMP implementation. The nutrient yield model developed by Frere et al. (1980) was applied to the water quality parameters from 175 storms, but it failed to adequately describe the observed phenomena. Seasonal changes in nutrient availability factors were not consistent with field conditions, nor were they significantly different in the pm- and post-BMP periods. An extended period of monitoring, with intensive BMP implementation over a larger portion of the watershed, is required to identify BMP effectiveness.     

Nonpoint Source Pollution Responses Simulation for Conversion Cropland to Forest in Mountains by SWAT in China

Several environmental protection policies have been implemented to prevent soil erosion and nonpoint source (NPS) pollutions in China. After severe Yangtze River floods, the “conversion cropland to forest policy” (CCFP) was carried out throughout China, especially in the middle and upper reaches of Yangtze River. The research area of the current study is located in Bazhong City, Sichuan Province in Yangtze River watershed, where soil erosion and NPS pollution are serious concerns. Major NPS pollutants include nitrogen (N) and phosphorus (P). The objective of this study is to evaluate the long-term impact of implementation of the CCFP on stream flow, sediment yields, and the main NPS pollutant loading at watershed level. The Soil and Water Assessment Tool (SWAT) is a watershed environmental model and is applied here to simulate and quantify the impacts. Four scenarios are constructed representing different patterns of conversion from cropland to forest under various conditions set by the CCFP. Scenario A represented the baseline, i.e., the cropland and forest area conditions before the implementation of CCFP. Scenario B represents the condition under which all hillside cropland with slope larger than 25° was converted into forest. In scenario C and D, hillside cropland with slope larger than 15° and 7.5° was substituted by forest, respectively. Under the various scenarios, the NPS pollution reduction due to CCFP implementation from 1996–2005 is estimated by SWAT. The results are presented as percentage change of water flow, sediment, organic N, and organic P at watershed level. Furthermore, a regression analysis is conducted between forest area ratio and ten years’ average NPS load estimations, which confirmed the benefits of implementing CCFP in reducing nonpoint source pollution by increasing forest area in mountainous areas. The reduction of organic N and organic P is significant (decrease 42.1% and 62.7%, respectively) at watershed level. In addition, this study also proves that SWAT modeling approach can be used to estimate NPS pollutants’ impacts of land use conversions in large watershed.     

Classification and spatial mapping of riparian habitat with applications toward management of streams impacted by nonpoint source pollution

Management of riparian habitats has been recognized for its importance in reducing instream effects of agricultural nonpoint source pollution. By serving as a buffer, well structured riparian habitats can reduce nonpoint source impacts by filtering surface runoff from field to stream. A system has been developed where key characteristics of riparian habitat, vegetation type, height, width, riparian and shoreline bank slope, and land use are classified as discrete categorical units. This classification system recognizes seven riparian vegetation types, which are determined by dominant plant type. Riparian and shoreline bank slope, in addition to riparian width and height, each consist of five categories. Classification by discrete units allows for ready digitizing of information for production of spatial maps using a geographic information system (GIS). The classification system was tested for field efficiency on Tom Beall Creek watershed, an agriculturally impacted third-order stream in the Clearwater River drainage, Nez Perce County, Idaho, USA. The classification system was simple to use during field applications and provided a good inventory of riparian habitat. After successful field tests, spatial maps were produced for each component using the Professional Map Analysis Package (pMAP), a GIS program. With pMAP, a map describing general riparian habitat condition was produced by combining the maps of components of riparian habitat, and the condition map was integrated with a map of soil erosion potential in order to determine areas along the stream that are susceptible to nonpoint source pollution inputs. Integration of spatial maps of riparian classification and watershed characteristics has great potential as a tool for aiding in making management decisions for mitigating off-site impacts of agricultural nonpoint source pollution.     

LAND USE AND AQUATIC BIOINTEGRITY IN THE BLACKFOOT RWER WATERSHED,MONTANA1

ABSTRACT: Benthic macroinvertebrate samples representing 151 taxa were collected in August 1995 to examine the linkage between land use, water quality, and aquatic biointegrity in seven tributaries of the Blackfoot River watershed, Montana. The tributaries represent silvicultural (timber harvesting), agricultural (irrigated alfalfa and hay and livestock grazing), and wilderness land uses. A 2.4 km (1.5 mile) reach of a recently restored tributary also was sampled for comparison with the other six sites. A geographic information system (GIS) was used to characterize the seven subwatersheds and estimate soil erosion, using the Modified Universal Soil Loss Equation, and sediment delivery. The wilderness stream had the highest aquatic biointegrity. Two agricultural streams had the largest estimated soil erosion and sediment delivery rates, the greatest habitat impairment from nonpoint source pollution, and the most impoverished macroinvertebrate communities. The silvicultural subwatersheds had greater rates of estimated soil erosion and sediment delivery and lower aquatic biointegrity than the wilderness reference site but evinced better conditions than the agricultural sites. A multiple-use (forestry, grazing, and wildlife management) watershed and the restored site ranked between the silvicultural and agricultural sites. This spectrum of land use and aquatic biointegrity illustrates both the challenges and opportunities that define watershed management.     

A WATER QUALITY‐BASED APPROACH FOR WATERSHED WIDE BMP STRATEGIES1

ABSTRACT: Watershed management strategies generally involve controlling nonpoint source pollution by implementing various best management practices (BMPs). Currently, stormwater management programs in most states use a performance‐based approach to implement onsite BMPs. This approach fails to link the onsite BMP performance directly to receiving water quality benefits, and it does not take into account the combined treatment effects of all the stormwater management practices within a watershed. To address these issues, this paper proposes a water quality‐based BMP planning approach for effective nonpoint source pollution control at a watershed scale. A coupled modeling system consisting of a watershed model (HSPF) and a receiving water quality model (CE‐QUAL‐W2) was developed to establish the linkage between BMP performance and receiving water quality targets. A Monte Carlo simulation approach was utilized to develop alternative BMP strategies at a watershed level. The developed methodology was applied to the Swift Creek Reservoir watershed in Virginia, and the results show that the proposed approach allows for the development of BMP strategies that lead to full compliance with water quality requirements.     

GEOGRAPHIC INFORMATION SYSTEM BASED NONPOINT POLLUTION MODELING1

ABSTRACT: The reauthorization of the Clean Water Act reemphasizes the need for regional scale monitoring and management of nonpoint pollution loads. The magnitude of the task will require that local governments and their consultants integrate information systems and modeling if they are to manage the massive data sets and conduct the array of simulations that will be needed to support the decision making processes. Interfacing geographic information systems (GIS) and nonpoint pollution modeling is a logical approach. The objective of the present study was to use the 37,000-acre area defined by the Kensington Quadrangle sheet in Montgomery County, Maryland, to show that GIS-supported nonpoint pollution modeling is practical and economically attractive. The purpose of the GIS is to estimate the spatial distribution of nonpoint nitrogen, phosphorous, zinc, lead, BOD, and sediment using a model developed by the Northern Virginia Planning District Commission. The system allows the user to change land uses in subareas to simulate the consequences of additional development or alternate management strategies. The tests show that in-house development of this type of special purpose GIS is a practical alternative to vendor supplied systems and that the required databases can be developed quite reasonably.     

TARGETING NONPOINT SOURCE POLLUTION CONTROL: PHOSPHORUS IN THE MINNESOTA RIVER BASIN1

ABSTRACT: The state of Minnesota seeks to reduce phosphorus loading to the Minnesota River by 40 percent from current levels. Looking at one major watershed in the river basin, we examined the cost effectiveness of targeting versus not targeting specific practices or regions within a watershed for controlling nonpoint phosphorus pollution from agriculture. Integrating biophysical simulation results from current and alternative farming systems with production cost and return estimates enabled us to analyze this policy. Our results indicated it is more cost effective to reduce nonpoint pollution by targeting particular regions or practices in a watershed compared to not targeting. Specifically, producers farming on cropland susceptible to erosion in close proximity to water will appreciably reduce phosphorus nonpoint pollution loading potential by switching from conventional tillage to conservation tillage and by reducing phosphorus fertilization levels to those recommended by the state extension service. Efforts to target those producers in the Minnesota River Basin could reduce potential transaction costs and compensation from “takings” by approximately $50 million (74 percent) over not targeting.     

Floodplain Trapping and Cycling Compared to Streambank Erosion of Sediment and Nutrients in an Agricultural Watershed

Floodplains and streambanks can positively and negatively influence downstream water quality through interacting geomorphic and biogeochemical processes. Few studies have measured those processes in agricultural watersheds. We measured inputs (floodplain sedimentation and dissolved inorganic loading), cycling (floodplain soil nitrogen [N] and phosphorus [P] mineralization), and losses (bank erosion) of sediment, N, and P longitudinally in stream reaches of Smith Creek, an agricultural watershed in the Valley and Ridge physiographic province. All study reaches were net depositional (floodplain deposition > bank erosion), had high N and P sedimentation and loading rates to the floodplain, high soil concentrations of N and P, and high rates of floodplain soil N and P mineralization. High sediment, N, and P inputs to floodplains are attributed to agricultural activity in the region. Rates of P mineralization were much greater than those measured in other studies of nontidal floodplains that used the same method. Floodplain connectivity and sediment deposition decreased longitudinally, contrary to patterns in most watersheds. The net trapping function of Smith Creek floodplains indicates a benefit to water quality. Further research is needed to determine if future decreases in floodplain deposition, continued bank erosion, and the potential for nitrate leaching from nutrient‐enriched floodplain soils could pose a long‐term source of sediment and nutrients to downstream rivers.     

PRIORITIZING NONPOINT SOURCE PHOSPHORUS LOADING USING A GRASS-MODELING SYSTEM1

ABSTRACT: A UNIX-based windows application was developed to integrate a phosphorus transport model with the Geographic Resources Analysis Support System (GRASS). The system prioritizes potential phosphorus loading from fields or cells in a watershed and can evaluate the effects of alternate management practices on phosphorus yield. The model simulates phosphorus loading by using a daily mass balance on a unit-area basis and incorporates the effects from rainfall, topography, soil properties, fertilizer and animal waste application, and management. Model predictions include dissolved and sediment-bound phosphorus yield, runoff volume, and sediment yield. Within the integrated GRASS-modeling system, the user can obtain model input data, execute the model using various options, rank model input and out. put data, and display them as GRASS-based maps or data tables. All functions are menu driven, developed using C language and X-window tools to run on a SUN workstation platform. The system provides a powerful and efficient tool for prioritizing phosphorus loading from nonpoint sources.     

Application of Tabu Search Algorithm With a Coupled AnnAGNPS‐CCHE1D Model to Optimize Agricultural Land Use1

Abstract: A principal contributor to soil erosion and nonpoint source pollution, agricultural activities have a major influence on the environmental quality of a watershed. Impact of agricultural activities on the quality of water resources can be minimized by implementing suitable agriculture land‐use types. Currently, land uses are designed (location, type, and operational schedule) based on field study results, and do not involve a science‐based approach to ensure their efficiency under particular regional, climatic, geological, and economical conditions. At present, there is a real need for new methodologies that can optimize the selection, design, and operation of agricultural land uses at the watershed scale by taking into account environmental, technical, and economical considerations, based on realistic simulations of watershed response. In this respect, the present study proposes a new approach, which integrates computational modeling of watershed processes, fluvial processes in the drainage network, and modern heuristic optimization techniques to design cost effective land‐use plans. The watershed model AnnAGNPS and the channel network model CCHE1D are linked together to simulate the sediment and pollutant transport processes. Based on the computational results, a multi‐objective function is set up to minimize soil losses, nutrient yields, and total associated costs, while the production profits from agriculture are maximized. The selected iterative optimization algorithm uses adaptive Tabu Search heuristic to flip (switching from one alternative to another) land‐change variables. USDA’s Goodwin Creek experimental watershed, located in Northern Mississippi, is used to demonstrate the capabilities of the proposed approach. The results show that the optimized land‐use design with BMPs using an integrated approach at the watershed level can provide efficient and cost‐effective conservation of the environmental quality by taking into account both productivity and profitability.     

A WINDOWS‐BASED GIS‐AGNPS INTERFACE1

ABSTRACT: ArcView Nonpoint Source Pollution Modeling (AVNPSM), an interface between ArcView GIS and AGNPS (Agricultural Nonpoint Source Pollution Model) is developed in support of agricultural watershed analysis and nonpoint source pollution management. The interface is PC‐based and operates in a Windows environment. It consists of seven modules: AGNPS utility, parameter generator, input file processor, model executor, output visualizer, statistical analyzer, and land use simulator. Basic input data to the interface include: soil, digital elevation model, land use/cover, water features, climate, and information on management practices. Application of the AVNPSM to a sample watershed indicates that it is user friendly, flexible, and robust, and it significantly improves the efficiency of the nonpoint source pollution modeling process.     

Conservation strategies for effective land management of protected areas using an erosion prediction information system (EPIS)

This research demonstrates the predictive modeling capabilities of a geographic information system (GIS)-based soil erosion potential model to assess the effects of implementing land use change within a tropical watershed. The Revised Universal Soil Loss Equation (RUSLE) was integrated with a GIS to produce an Erosion Prediction Information System (EPIS) and modified to reflect conditions found in the mountainous tropics. Research was conducted in the Zenzontia subcatchment of the Río Ayuquíla, located within the Sierra de Manantlán Biosphere Reserve (SMBR), México. Expanding agricultural activities within this area will accentuate the already high rate of soil erosion and resultant sediment loading occurring in the Río Ayuquíla. Two land-use change scenarios are modeled with the EPIS: (1) implementation of soil conservation practices in erosion prone locations; and (2) selection of sites for agricultural expansion which minimize potential soil loss. Confronted with limited financial resources and the necessity for expedient action, managers of the SMBR can draw upon the predictive capacity of the EPIS to facilitate rapid and informed land-use planning decisions.     

EVALUATION OF RUNOFF,EROSION, AND PHOSPHORUS MODELING SYSTEM—SIMPLE1

ABSTRACT: The purpose of this study was to evaluate the performance of Spatially Integrated Models for Phosphorus Loading and Erosion (SIMPLE) in predicting runoff volume, sediment loss, and phosphorus loading from two watersheds. The modeling system was applied to the 334 ha QOD subwatershed, part of the Owl Run watershed, located in Fauquier County, Virginia, and to the 2240 ha watershed, Battle Branch, located in Delaware County, Oklahoma. Simulation runs were conducted at cell and field scales, and simulation results were compared with observed data. Runoff volume and dissolved phosphorus loading were measured at the Battle Branch watershed. Runoff volume, sediment yield, and total phosphorus loading were measured at the QOD site. SIMPLE tended to underestimate runoff volumes during the dormant period, from November to March. The comparison between observed and predicted dissolved phosphorus showed better correlation than for observed and predicted total phosphorus loading. Cell level simulations provided similar estimates of runoff volume and phosphorus loading when compared to field level simulations for both watersheds. However, observed sediment yields better compared with the values predicted from the cell level simulation when compared to field level simulation. Finally, results of model evaluation indicated that SIMPLE's predictive ability is acceptable for screening applications but not for site-specific quantitative predictions.     

COMPARATIVE EVALUATION OF LAND COVER DATA SOURCES FOR EROSION PREDICTION1

ABSTRACT: A fundamental problem in protecting surface drinking water supplies is the identification of sites highly susceptible to soil erosion and other forms of nonpoint source (NPS) pollution. The New York City Department of Environmental Protection is trying to identify erodible sites as part of a program aimed at avoiding costly filtration. New York City's 2,000 square mile watershed system is well suited for analysis with geographic information systems (GIS); an increasingly important tool to determine the spatial distribution of sensitive NPS pollution areas. This study used a GIS to compare three land cover sources for input into the Modified Universal Soil Loss Equation (MUSLE), a model estimating soil loss from rangeland and forests, for a tributary watershed within New York City's water supply system. Sources included both conventional data (aerial photography) and Landsat data (MSS and TM images). Although land cover classifications varied significantly across these sources, location-specific and aggregate watershed predictions of the MUSLE were very similar. We conclude that using Landsat TM imagery with a hybrid classification algorithm provides a rapid, objective means of developing large area land cover databases for use in the MUSLE, thus presenting an attractive alternative to photo interpretation.     

Evaluating Nonpoint Pollution Policy Using a Tightly Coupled Spatial Decision Support System

Policy makers often must rely on the cumulative impact of independent actions taken by local landowners to achieve environmental goals. The connection between policy, regulation, and local action, however, is often not well understood and, thus, the impact of proposed policies may be difficult to predict. In this study we evaluate the effectiveness of alternative policy scenarios for agricultural set aside programs (e.g., the conservation reserve program administered by the United States Department of Agriculture) in reducing nonpoint pollution. Two alternative policy scenarios are developed and analyzed; one based on the erodibility index (detachment), the other sediment yield (transport). An estimate of the cumulative impact of associated land use change on nonpoint pollution is made using the AGNPS distributed parameter watershed model. This work is completed within the Cypress Creek watershed in southern Illinois. An analysis of the resulting data suggests that the most efficacious regulatory strategy for achieving nonpoint water pollution goals depends, in part, on place-specific land use patterns. This conclusion provides a solid argument for place-based regulatory strategies.     

Landscape Planning for Agricultural Nonpoint Source Pollution Reduction III: Assessing Phosphorus and Sediment Reduction Potential

Riparian buffers have the potential to improve stream water quality in agricultural landscapes. This potential may vary in response to landscape characteristics such as soils, topography, land use, and human activities, including legacies of historical land management. We built a predictive model to estimate the sediment and phosphorus load reduction that should be achievable following the implementation of riparian buffers; then we estimated load reduction potential for a set of 1598 watersheds (average 54 km²) in Wisconsin. Our results indicate that land cover is generally the most important driver of constituent loads in Wisconsin streams, but its influence varies among pollutants and according to the scale at which it is measured. Physiographic (drainage density) variation also influenced sediment and phosphorus loads. The effect of historical land use on present-day channel erosion and variation in soil texture are the most important sources of phosphorus and sediment that riparian buffers cannot attenuate. However, in most watersheds, a large proportion (approximately 70%) of these pollutants can be eliminated from streams with buffers. Cumulative frequency distributions of load reduction potential indicate that targeting pollution reduction in the highest 10% of Wisconsin watersheds would reduce total phosphorus and sediment loads in the entire state by approximately 20%. These results support our approach of geographically targeting nonpoint source pollution reduction at multiple scales, including the watershed scale.     

AN INTERACTWE MODELING ENVIRONMENT FOR NON-POINT SOURCE POLLUTION CONTROL1

ABSTRACT: Non-point source pollution cuntinues to be an important environmental and water quality management problem. For the moat part, analysis of non-point source pollution in watersheds has depended on the use of distributed models to identify potential problem areas and to assess the effectiveness of alternative management practices. To effectively use these models for watershed water quality management, users depend on integrated geographic information systems (GIS)-based interfaces for input/output data management. However, existing interfaces are ad-hoc and the utility of GIS is limited to organization of input data and display of output data. A highly interactive water quality modeling interface that utilizes the functional components and analytical capability of GIS is highly desirable. This paper describes the tight coupling of the Agricultural Non-point Source (AGNPS) water quality model and ARC/INFO GIS software to provide an interactive hybrid modeling environment for evaluation of non-point source pollution in a watershed. The modeling environment is designed to generate AGNPS input parameters from user-specified GIS coverages, create AGNPS input data files, control AGNPS model simulations, and extract and organize AGNPS model output data for display. An example application involving the estimation of pesticide loading in a southern Iowa agricultural watershed demonstrates the capability of the modeling environment. Compared with traditional methods of watershed water quality modeling using the AGNPS model or other ad-hoc interfaces between a distributed model and GIS, the interactive modeling environment system is efficient and significantly reduces the task of watershed analysis using tightly coupled GIS databases and distributed models.     

Assessing the Risk of Phosphorus Loss and Identifying Critical Source Areas in the Chaohu Lake Watershed,China

Agricultural nonpoint phosphorus (P) pollution is a primary cause of eutrophication in many freshwater systems. Identifying areas that are at high risk for P loss in a watershed and concentrating management efforts on these smaller sections is a more effective method for limiting P loss than implementing general strategies over a broad area. A modified P index scheme was used to assess the risk of P loss and identify critical source areas in the Chaohu Lake watershed on a regional scale. In the new P ranking scheme, soil P sorption index (PSI) and degree of P saturation (DPS) were introduced as source factors to represent the inherent ability of P transport in the soil-water interface. Distance from P sources to Chaohu Lake was also considered as a transport factor to take into account P degradation from source to the final receiving water. The ranking scheme was modified to use available data on the regional scale. P index calculation results showed high spatial variation of P loss risk in the Chaohu Lake watershed. The highest risk areas focused on the downstream parts of the main rivers that discharge into Chaohu Lake. The induction of new components into the P index calculation makes it possible to identify critical source areas of nonpoint P loss on a regional scale, thus allowing decision makers to implement best management practices (BMPs) in such a manner as to minimize P loss to sensitive watercourses.     

ADDRESSING TOTAL PHOSPHORUS IMPAIRMENTS WITH WATER QUALITY TRADING1

ABSTRACT: Water quality trading is a voluntary economic process that provides an opportunity for dischargers to reduce the costs associated with meeting a discharge limitation. Trading can provide a cost effective solution for point sources (i.e., wastewater treatment plants) to meet strict effluent limitations set in response to total maximum daily loads (TMDLs). A successful trading program often depends on first determining the trading suitability of a pollutant for a particular watershed. A simple technical approach has been developed to identify sub‐watersheds within the Raritan River Basin, New Jersey, where water quality trading could provide a cost effective and scientifically feasible method for addressing total phosphorus impairments. The methodology presented will serve as a model to conduct similar analyses in other watersheds. The Raritan River Basin was divided into 12 subwatershed‐based study areas. Point‐nonpoint source trading opportunities were examined for each study area by examining the point and nonpoint source total phosphorus loading to impaired water bodies. Of the 12 subwatersheds examined, four had a high potential for implementing a successful trading program. Since instream phosphorus concentrations are closely related to soil erosion, an additional analysis was performed to examine soil erodibility. Recommendations are presented for conducting an economic analysis following the feasibility study.