共查询到20条相似文献,搜索用时 165 毫秒
1.
2.
城市垃圾渗滤液处理技术发展现状 总被引:3,自引:0,他引:3
介绍了城市垃圾渗滤液的来源和特点,根据近些年的工程实际和实验研究结果,主要论述了垃圾渗滤液的处理方案和处理技术,包括回灌法、土地处理法、物理化学法、生物法等。对这些处理方法进行了比较,在此基础上提出了相应的建议。 相似文献
3.
城市垃圾渗滤液是一种成分复杂的高浓度有机废水,若不加处理直接排放,会造成严重的环境污染。以保护环境为目的,对渗滤液进行处理是必不可少的。文章介绍了我们在设计国内某垃圾渗滤液处理厂所采用的工艺流程,此方法是采用高效生化处理与现代化膜技术工艺深度处理相结合来处理垃圾渗滤液。 相似文献
4.
5.
城市垃圾渗滤液的处理是垃圾填埋场运行管理中非常重要的问题。文章介绍了垃圾渗滤液性质及处理工艺的现状,并结合工程实例进行了分析比较,在此基础上得出了一些结论。 相似文献
6.
垃圾填埋场渗滤液处理方法及其分析 总被引:14,自引:5,他引:9
垃圾渗滤液的处理是垃圾填埋场设计、运行和管理中非赏关键而又难以解决的问题。本文结合国内外大量的工程实例,介绍了各种渗滤液处理方法,分析了各方法的特点和应用范围,指出了渗滤液处理研究的方向。 相似文献
7.
8.
9.
10.
垃圾填埋场渗滤液对地下水污染的修复技术 总被引:1,自引:0,他引:1
在查阅国内外相关文献资料的基础上,综述了垃圾填埋场渗滤液的产生以及对地下水的污染,介绍了垃圾渗滤液污染控制措施,包括顶部覆盖层、垃圾分层填埋、地表入渗水导流等;然后主要介绍了地下水的原位修复技术,包括加药法、地下曝气法、生物修复,等。 相似文献
11.
渗滤液回灌在实际应用中应注意的问题 总被引:3,自引:0,他引:3
本文介绍了垃圾填埋场渗滤液回灌的机理、优缺点,“干填埋”与“湿填埋”之间的区别。渗滤液回灌可增加填埋废物的含水率,加快垃圾的降解速率,减少渗滤液的处理时间,提高填埋气中甲烷的含量,加速填埋场稳定化进程。鉴于以上这些优点,渗滤液回灌作为一种渗滤液处理方式将会有极大的应用前景。但在实际应用中回灌的渗滤液容易泄漏而导致地下水污染,这是影响渗滤液回灌广泛应用的主要原因。为了避免使地下水受污染,本文总结和分析了渗滤液回灌在实际应用中应注意的问题。 相似文献
12.
13.
14.
15.
Sanphoti N Towprayoon S Chaiprasert P Nopharatana A 《Journal of environmental management》2006,81(1):27-35
In order to increase methane production efficiency, leachate recirculation is applied in landfills to increase moisture content and circulate organic matter back into the landfill cell. In the case of tropical landfills, where high temperature and evaporation occurs, leachate recirculation may not be enough to maintain the moisture content, therefore supplemental water addition into the cell is an option that could help stabilize moisture levels as well as stimulate biological activity. The objectives of this study were to determine the effects of leachate recirculation and supplemental water addition on municipal solid waste decomposition and methane production in three anaerobic digestion reactors. Anaerobic digestion with leachate recirculation and supplemental water addition showed the highest performance in terms of cumulative methane production and the stabilization period time required. It produced an accumulated methane production of 54.87 l/kg dry weight of MSW at an average rate of 0.58 l/kg dry weight/d and reached the stabilization phase on day 180. The leachate recirculation reactor provided 17.04 l/kg dry weight at a rate of 0.14l/kg dry weight/d and reached the stabilization phase on day 290. The control reactor provided 9.02 l/kg dry weight at a rate of 0.10 l/kg dry weight/d, and reached the stabilization phase on day 270. Increasing the organic loading rate (OLR) after the waste had reached the stabilization phase made it possible to increase the methane content of the gas, the methane production rate, and the COD removal. Comparison of the reactors' efficiencies at maximum OLR (5 kgCOD/m(3)/d) in terms of the methane production rate showed that the reactor using leachate recirculation with supplemental water addition still gave the highest performance (1.56 l/kg dry weight/d), whereas the leachate recirculation reactor and the control reactor provided 0.69 l/kg dry weight/d and 0.43 l/kg dry weight/d, respectively. However, when considering methane composition (average 63.09%) and COD removal (average 90.60%), slight differences were found among these three reactors. 相似文献
16.
17.
Zhang H Zhang DQ Jin TF He PJ Shao ZH Shao LM 《Journal of environmental management》2011,92(10):2533-2538
Biostabilization can remove considerable amounts of moisture and degradable organic materials from municipal solid waste (MSW), and can therefore be an effective form of pretreatment prior to landfill. The environmental and economic impacts of two combined processes, active stage biostabilization + sanitary landfill (AL), and active and curing stage biostabilization + sanitary landfill (ACL), were compared with sanitary landfill (SL) for MSW with high moisture content. The results indicated that land requirement, leachate generation, and CH(4) emission in the ACL process decreased by 68.6%, 89.1%, and 87.6%, respectively, and the total cost was reduced by 24.1%, compared with SL. This implies that a combined biostabilization and landfill process can be an environmentally friendly and economically feasible alternative to landfill of raw MSW with high moisture content. Sensitivity analysis revealed that treatment capacity and construction costs of biostabilization and the oxidation factor of CH(4) significantly influenced the costs and benefits of the AL and ACL process at an extremely low land price. When the land price was greater than 100 USD m(-2), it became the dominating factor in determining the cost of treatment and disposal, and the total costs of ACL were reduced to less than 40% of those of SL. 相似文献
18.
桐庐县富春江、分水江库区漂浮物主要由水葫芦、生活垃圾、动物尸体三部分构成,结合桐庐县垃圾处理处置设施建设现状及规划,对水葫芦及生活垃圾采用机械打捞-压缩中转-烘干(仅水葫芦)-焚烧工艺,对动物尸体采用人工打捞-冷藏车运输-冷库储存-焚烧工艺。为确保水葫芦焚烧可行性,比较了烟气直接烘干和蒸汽间接烘干两种工艺,推荐采用蒸汽间接烘干。 相似文献
19.
韩静 《中国环境管理干部学院学报》2012,22(2):52-54
垃圾填埋场渗滤液属于高浓度氨氮废水,其水量、水质特性变化大,成分复杂,因此较难处理。反渗透分离技术能有效截留垃圾渗滤液中溶解态的有机和无机污染物。采用三级反渗透处理垃圾渗滤液工艺处理后的出水水质,能够满足《生活垃圾填埋污染控制标准》(DB16889-2008)要求,并把渗滤液浓缩液回灌于填埋场。 相似文献
20.
《Resources, Conservation and Recycling》2011,55(12):1037-1047
Solid waste management is gaining significant importance with the ever-increasing quantities of waste materials generated these days. With increased environmental awareness and its potential hazardous effects, recycling/utilization of these materials have become an attractive alternative to disposal. Some of these waste and hazardous materials could possible be used in cement-based materials. One of such waste is municipal solid waste. Ash is obtained after incineration of MSW.This paper presents comprehensive details of the physical, chemical, and mineralogical composition, elemental analysis of ash obtained from MSW. It also covers the effect of MSW ash on the hydration characteristics, setting times, compressive strength, sulfate resistance and mass loss of cement and mortar. It also deals with the leachate analysis of MSW ash. 相似文献