Force and acceleration corridors from lateral head impact

This study was conducted to provide force and acceleration corridors at different velocities describing the dynamic biomechanics of the lateral region of the human head. Temporo-parietal impact tests were conducted using specimens from ten unembalmed post-mortem human subjects. The specimens were isolated at the occipital condyle level, and pre-test x-ray and computed tomography images were obtained. They were prepared with multiple triaxial accelerometers and subjected to increasing velocities (up to 7.7 m/s) using free-fall techniques by impacting onto a force plate from which forces were recorded. A 40-durometer padding (50-mm thickness) material covering the force plate served as the impacting boundary condition. Computed tomography images obtained following the final impact test were used to identify pathology. Four specimens sustained skull fractures. Peak force, displacement, acceleration, energy, and head injury criterion variables were used to describe the dynamic biomechanics. Force and acceleration responses obtained from this experimental study along with other data will be of value in validating finite element models. The study underscored the need to enhance the sample size to derive probability-based human tolerance to side impacts.     

Injury risk in behind armor blunt thoracic trauma.

First responders and military personnel are particularly susceptible to behind armor blunt thoracic trauma in occupational scenarios. The objective of this study was to develop an armored thorax injury risk criterion for short duration ballistic impacts. 9 cadavers and 2 anthropomorphic test dummies (AUSMAN and NIJ 0101.04 surrogate) were tested over a range of velocities encompassing low severity impacts, medium severity impacts, and high severity impacts based upon risk of sternal fracture. Thoracic injuries ranged from minor skin abrasions (abbreviated injury scale [AIS] 1) to severe sternal fractures (AIS 3+) and were well correlated with impact velocity and bone mineral density. 8 male cadavers were used in the injury risk criterion development. A 50% risk of AIS 3+ injury corresponded to a peak impact force of 24,900 +/- 1,400 N. The AUSMAN impact force correlated strongly with impact velocity. Recommendations to improve the biofidelity of the AUSMAN include implementing more realistic viscera and decreasing the skin thickness.     

Development of a Computationally Efficient Full Human Body Finite Element Model

Introduction: A simplified and computationally efficient human body finite element model is presented. The model complements the Global Human Body Models Consortium (GHBMC) detailed 50th percentile occupant (M50-O) by providing kinematic and kinetic data with a significantly reduced run time using the same body habitus.

Methods: The simplified occupant model (M50-OS) was developed using the same source geometry as the M50-O. Though some meshed components were preserved, the total element count was reduced by remeshing, homogenizing, or in some cases omitting structures that are explicitly contained in the M50-O. Bones are included as rigid bodies, with the exception of the ribs, which are deformable but were remeshed to a coarser element density than the M50-O. Material models for all deformable components were drawn from the biomechanics literature. Kinematic joints were implemented at major articulations (shoulder, elbow, wrist, hip, knee, and ankle) with moment vs. angle relationships from the literature included for the knee and ankle. The brain of the detailed model was inserted within the skull of the simplified model, and kinematics and strain patterns are compared.

Results: The M50-OS model has 11 contacts and 354,000 elements; in contrast, the M50-O model has 447 contacts and 2.2 million elements. The model can be repositioned without requiring simulation. Thirteen validation and robustness simulations were completed. This included denuded rib compression at 7 discrete sites, 5 rigid body impacts, and one sled simulation. Denuded tests showed a good match to the experimental data of force vs. deflection slopes. The frontal rigid chest impact simulation produced a peak force and deflection within the corridor of 4.63 kN and 31.2%, respectively. Similar results vs. experimental data (peak forces of 5.19 and 8.71 kN) were found for an abdominal bar impact and lateral sled test, respectively. A lateral plate impact at 12 m/s exhibited a peak of roughly 20 kN (due to stiff foam used around the shoulder) but a more biofidelic response immediately afterward, plateauing at 9 kN at 12 ms. Results from a frontal sled simulation showed that reaction forces and kinematic trends matched experimental results well. The robustness test demonstrated that peak femur loads were nearly identical to the M50-O model. Use of the detailed model brain within the simplified model demonstrated a paradigm for using the M50-OS to leverage aspects of the M50-O. Strain patterns for the 2 models showed consistent patterns but greater strains in the detailed model, with deviations thought to be the result of slightly different kinematics between models. The M50-OS with the deformable skull and brain exhibited a run time 4.75 faster than the M50-O on the same hardware.

Conclusions: The simplified GHBMC model is intended to complement rather than replace the detailed M50-O model. It exhibited, on average, a 35-fold reduction in run time for a set of rigid impacts. The model can be used in a modular fashion with the M50-O and more broadly can be used as a platform for parametric studies or studies focused on specific body regions.     

The effect of muscle activation on neck response

Prevention of neck injuries due to complex loading, such as occurs in traffic accidents, requires knowledge of neck injury mechanisms and tolerances. The influence of muscle activation on outcome of the injuries is not clearly understood. Numerical simulations of neck injury accidents can contribute to increase the understanding of injury tolerances. The finite element (FE) method is suitable because it gives data on stress and strain of individual tissues that can be used to predict injuries based on tissue level criteria.The aim of this study was to improve and validate an anatomically detailed FE model of the human cervical spine by implement neck musculature with passive and active material properties. Further, the effect of activation time and force on the stresses and strains in the cervical tissues were studied for dynamic loading due to frontal and lateral impacts.The FE model used includes the seven cervical vertebrae, the spinal ligaments, the facet joints with cartilage, the intervertebral disc, the skull base connected to a rigid head, and a spring element representation of the neck musculature. The passive muscle properties were defined with bilinear force-deformation curves and the active properties were defined using a material model based on the Hill equation. The FE model's responses were compared to volunteer experiments for frontal and lateral impacts of 15 and 7 g. Then, the active muscle properties where varied to study their effect on the motion of the skull, the stress level of the cortical and trabecular bone, and the strain of the ligaments.The FE model had a good correlation to the experimental motion corridors when the muscles activation was implemented. For the frontal impact a suitable peak muscle force was 40 N/cm2 whereas 20 N/cm2 was appropriate for the side impact. The stress levels in the cortical and trabecular bone were influenced by the point forces introduced by the muscle spring elements; therefore a more detailed model of muscle insertion would be preferable. The deformation of each spinal ligament was normalized with an appropriate failure deformation to predict soft tissue injury. For the frontal impact, the muscle activation turned out to mainly protect the upper cervical spine ligaments, while the musculature shielded all the ligaments disregarding spinal level for lateral impacts. It is concluded that the neck musculature does not have the same protective properties during different impacts loadings.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

New biofidelic corridor and biofidelity test procedure for pedestrian legform impactors

The objectives of this research are to propose a new impact response corridor for the ISO legform impactor and to determine the biofidelity of the current legform impactor with rigid leg and thigh developed by the Transport Research Laboratory (TRL). The latest data obtained from Post Mortem Human Subject (PMHS) knee impact tests were analyzed in connection with the proposal, and biofidelity legform impact tests were conducted using the current rigid legform impactor. New normalized biofidelic corridors of impact force corresponding to adult male 50th percentile (AM50) are proposed. The impact test results indicate the current rigid legform impactor does not have sufficient human knee biofidelity. The present results suggest that human tolerance can not be used directly for the injury reference value of the legform impactor. A conversion method is needed to interpret the data measured by current legform impactors as the injury reference value.     

Deflection, acceleration, and force corridors for small females in side impacts

OBJECTIVE: This study was undertaken to develop biomechanical corridors applicable to the small-sized female in side impacts. METHODS: Sled tests were conducted using post mortem human subjects at a velocity of 6.7 m/s. Three chestbands were used to compute deflection-time histories at the axilla, xyphoid process, and tenth rib levels. Triaxial accelerometers were fixed to the upper and lower spine and sacrum to record acceleration-time histories. Specimens contacted the load wall with varying initial conditions (rigid and padded; flat wall and offset) from which impact forces to the thoracic, abdominal, and pelvic regions were obtained using load cell data. Adopting signal processing and mass-based scaling methods, corridors were derived for forces, accelerations, and chest deflections at three levels for all initial conditions. RESULTS: All time history corridors were expressed as mean plus/minus one standard deviation and provided in the article. CONCLUSIONS: Acceleration-, deflection-, and force-time corridors obtained for the chest and pelvic regions of the human body will assist in the assessment of anthropomorphic test devices used in crashworthiness evaluations.     

Review: The Dynamics of Near Vertex Head Impact and its Role in Injury Prevention and the Complex Clinical Presentation of Basicranial and Cervical Spine Injury

The clinical presentation of cervical and basilar skull fractures following bead impact is often complex, particularly when multiple noncontiguous fractures are present. Based on the results of 22 human cadaver head-neck impact experiments, a biomechanical framework of spinal injury is developed in which these complex cases may be better understood. This includes the significance of head rebound, head and neck decoupling, cervical spine buckling, cervical injury mechanisms, basilar skull fractures, and cervical spine tolerance. These data also demonstrate that compliant pads significantly increase the risk for spinal injury though they also significantly reduce peak head force and the head injury criteria (p < 0.04). On the basis of these observations, we hypothesize that impact injury should be modeled as the dynamic response of two large masses, coupled by a segmented curved beam-column composed of seven small masses with interposed nonlinear viscoelastic flexibility elements.     

Overview of a combined computational–experimental evaluation for the assessment of panoramic sunroof impact characteristics for ejection mitigation

Abstract

Objective: To meet increasing customer demand, many vehicle manufacturers are now offering a panoramic sunroof option in their vehicle lineup. Currently, there is no regulatory or consumer test aimed at assessing the potential for ejection mitigation of roof glazing, which leaves manufacturers to develop internal performance standards to guide designs. The goal of this study was to characterize the variety of occupant-to-roof impacts involving unbelted occupants in rollover crashes to determine the ranges of possible effective masses and impact velocities. This information can be used to define occupant retention requirements and performance criteria for roof glazing in occupant ejection protection.

Methods: This study combined computational (MADYMO and LS-Dyna) simulations of occupant kinematics in rollover crashes with laboratory rollover crash tests using the dynamic rollover test system (DRoTS) and linked them through controlled anthropomorphic test device (ATD)-to-roof (“drop”) impact tests. The DRoTS and the ATD drop tests were performed to explore impact scenarios and estimate dummy-to-roof impact impulses. Next, 13 sets of vehicle kinematics and deformation data were extracted from a combination of vehicle dynamics and finite element model simulations that reconstructed variations of rollover crash cases from the field data. Then occupant kinematics data were extracted from a full-factorial sensitivity study that used MADYMO simulations to investigate how changes in anthropometry and seating position would affect occupant–roof impacts across all 13 cases. Finite element (FE) simulations of ATD and Global Human Body Models Consortium (GHBMC) human body model (HBM) roof impacts were performed to investigate the most severe cases from the MADYMO simulations to generate a distribution of head-to-roof impact energies.

Results: From the multiparameter design of experiment and experimental study, kinematics and energy output were extracted and analyzed. Based on dummy-to-roof impact force and dummy-to-roof impact velocity, the most severe rollover scenarios were identified. In the DRoTS experiments followed by the drop tests, the range of identified impact velocities was between 2 and 5.8 m/s. However, computational simulations of the rollover crashes showed higher impact velocities and similar effective masses. The largest dummy-to-roof impact velocity was 11 m/s.

Conclusions: This study combined computational and experimental analyses to determine a range of possible unbelted occupant-to-roof impact energies. These results can be used to determine design parameters for an impactor for the assessment of the risk of roof glazing ejection for unbelted occupants in rollover crashes.     

基于Hoek Brown强度准则深埋隧道掌子面稳定性分析*

为了研究孔隙水压力作用下深埋隧道掌子面的稳定性，构建了深埋盾构隧道的二维刚性有限平动多块体的破坏模式，并引入了Hoek Brown强度准则。利用极限分析得到掌子面前方土体的内部耗散能和外力做的功，利用Hoek Brown强度准则推导得到极限支护力的目标函数，通过MATLAB数值软件的规划求解得到支护力的解，和既有文献中的成果对比，2种方法得到解的最大误差为6.7%，验证了Hoek Brown强度准则的有效性。对各个岩体参数下深埋隧道掌子面极限支护力的变化规律进行分析，结果表明:深埋隧道掌子面前方的极限支护力随着扰动因子D和孔隙水压力系数ru的增大而增大，随着地质强度指标GSI和参数mi的增大而减小；破坏范围随着参数mi和孔隙水压力系数ru的增大而减小，而随着地质强度指标GSI和扰动因子D的增大而增大。研究结果可为岩质地层中深埋盾构隧道掌子面支护力的设计提供理论依据。     

Variability in vehicle and dummy responses in rear-end collisions

OBJECTIVE: The objective of this study was to quantify the occupant response variability due to differences in vehicle and seat design in low-speed rear-end collisions. METHODS: Occupant response variability was quantified using a BioRID dummy exposed to rear-end collisions in 20 different vehicles. Vehicles were rolled rearward into a rigid barrier at 8 km/h and the dynamic responses of the vehicle and dummy were measured with the head restraint adjusted to the up most position. In vehicles not damaged by this collision, additional tests were conducted with the head restraint down and at different impact speeds. RESULTS: Despite a coefficient of variation (COV) of less than 2% for the impact speed of the initial 8 km/h tests, the vehicle response parameters (speed change, acceleration, restitution, bumper force) had COVs of 7 to 23% and the dummy response parameters (head and T1 kinematics, neck loads, NIC, N(ij) and N(km)) had COVs of 14 to 52%. In five vehicles tested multiple times, a head restraint in the down position significantly increased the peak magnitude of many dummy kinematic and kinetic response parameters. Peak head kinematics and neck kinetics generally varied linearly with head restraint back set and height, although the neck reaction moment reversed and increased considerably if the dummy's head wrapped onto the top of the head restraint. CONCLUSIONS: The results of this study support the proposition that the vehicle, seat, and head restraint are a safety system and that the design of vehicle bumpers and seats/head restraint should be considered together to maximize the potential reduction in whiplash injuries.     

Thoracic Response and Trauma in Air Bag Deployment Tests with Out-of-Position Small Female Surrogates

The Hybrid III 5th percentile female dummy and seven small female cadavers were instrumented and tested as out-of-position drivers in static air bag deployment tests. Tank test pressure profiles were used to characterize inflator peak pressures and pressure onset rates of two production air bags and a prototype dual-stage system prior to their use in the static deployments. In the out-of-position tests, the chest of die surrogate was positioned in direct contact with the air bag module in an effort to create a worst-case loading environment for the thorax. For the cadavers, post-test radiographs and autopsy investigations identified rib fractures as the most common injury and showed that the number of fractures correlated well with maximum chest compression. The Viscous Criteria exceeded 1.0 m/s in nearly all dummy and cadaver tests but did not correlate well with the severity level of observed cadaver injury which was largely determined by hard-tissue rather than soft-tissue trauma. Statistical analysis of the injury, severity relative to the air bag and test parameters suggests that the pressure onset rate of the inflator is more important than peak pressure in determining the severity of out-of-position injuries and should be given primary consideration in inflator depowering efforts. Statistical comparison of dummy and cadaver responses indicates acceptable biofldelity of the Hybrid III small female dummy.     

Development of injury criteria for pelvic fracture in frontal crashes

OBJECTIVE: This article assesses the position-dependent injury tolerance of the hip in the frontal direction based on testing of eight postmortem human subjects. METHODS: For each subject, the left and right hemipelvis complex was axially loaded using a previously developed test configuration. Six positions were defined from a seated femur neutral condition, combining flexed, neutral, and extended femur positions with abducted, neutral, and adducted positions. RESULTS: Axial injury tolerances based on peak force were found to be 6,850 +/- 840 N in the extended, neutral position and 4,080 +/- 830 N in the flexed, neutral position. From the flexed neutral orientation, the peak axial force increased 18% for 20 degrees abduction and decreased 6% for 20 degrees adduction. From the extended, neutral orientation, the peak axial force decreased 4% for 20 degrees abduction and decreased 3% for 20 degrees adduction. However, as there is evidence that increases in loading may occur after the initiation of fracture, the magnitude of the peak force is likely related to the extent of injury, not to the initial tolerance. Using the axial femur force at the initiation of fracture (assessed with acoustic crack sensors) as a potentially more relevant indicator of injury may lower the existing injury criteria. This fracture initiation force varied by position from 3,010 +/- 560 N in the flexed, neutral position to 5,470 N in the extended, abducted position. Further, there was a large position-dependent variation in the ratio of fracture initiation force to the peak axial force. The initiation of fracture was 83% of the peak axial force in the extended, abducted position, but the ratio was 34% in the extended, adducted position. CONCLUSIONS: This may have significant implications for the development of pelvic injury criteria by automobile designers attempting to mitigate pelvis injuries.     

软弱煤岩体巷道围岩锚固力衰减特性研究

软弱煤岩体巷道围岩存在强度低、胶结程度差、遇水弱化等特点,正常树脂锚固时出现锚固力低、衰减速度快等问题,易造成巷道围岩严重变形破坏。利用自行研发的锚固孔底单翼倒楔形扩孔装置进行孔底扩孔锚固试验,分析了软弱煤岩体不同锚固状态下锚固力与位移的变化关系。试验结果表明:正常锚固和扩孔锚固状态下脱锚点发生前锚固力与位移曲线表现一致,脱锚点发生后正常锚固状态下残余锚固力瞬间衰减到几乎为0,而扩孔锚固状态下残余锚固力衰减程度较小,并出现残余锚固力大于脱锚力的情况;扩孔锚固状态下脱锚点处扩孔锚固的最大锚固力比正常锚固状态下平均提高2.8倍。软弱煤岩体锚固段发生脱锚界面为锚固剂与孔壁的交界面,脱锚后扩孔段锚固剂对倒楔形孔壁产生挤压破坏,从而提高了软弱煤岩体残余锚固力。试验结果为解决软弱煤岩体巷道锚网支护技术难题提供重要借鉴。     

T型管道不同封闭状态瓦斯爆燃火焰传播特征

为了研究分岔管道不同封闭状态下瓦斯爆燃火焰阵面传播规律,在自制的T型透明分岔管道内,设置支管端口完全封闭、直管左端口弱封闭,采用光电传感器和压力传感器测试了直管右端弱封闭、完全封闭2种情况下,预混甲烷-空气可燃气体爆燃火焰传播过程中速度、超压参数的变化情况。结果表明:由于分岔的存在,2种封闭状态在支管端点火后瓦斯爆燃火焰阵面在支管中的传播速度均先增大后减小;直管右端弱封闭时,经过分岔后火焰加速向直管两端传播速度基本一致,分别达到86.29 m/s和88.07 m/s;直管右端完全封闭时,火焰向弱封闭端传播速度增大至166.67 m/s,火焰向完全封闭端传播时并不断压缩未燃气体产生高压振荡反馈导致火焰振荡传播现象,火焰速度不断减小至4.84 m/s;管道内瓦斯爆燃超压均迅速上升到达峰值,之后受压缩气体的膨胀和冲击后爆燃产物的振荡作用迅速下降。     

Cervical vertebral motions and biomechanical responses to direct loading of human head

There is little known data characterizing the biomechanical responses of the human head and neck under direct head loading conditions. However, the evaluation of the appropriateness of current crash test dummy head-neck systems is easily accomplished. Such an effort, using experimental means, generates and provides characterizations of human head-neck response to several direct head loading conditions. Low-level impact loads were applied to the head and face of volunteers and dummies. The resultant forces and moments at the occipital condyle were calculated. For the volunteers, activation of the neck musculature was determined using electromyography (EMG). In addition, cervical vertebral motions of the volunteers have been taken by means of X-ray cineradiography. The Ethics Committee of Tsukuba University approved the protocol of the experiments in advance. External force of about 210 N was applied to the head and face of five volunteers with an average age of 25 for the duration of 100 msec or so, via a strap at one of four locations in various directions: (1) an upward load applied to the chin, (2) a rearward load applied to the chin without facial mask, (3) a rearward load applied to the chin with the facial mask, and (4) a rearward load applied to the forehead. The same impact force as those for the human volunteers was also applied to HY-III, THOR, and BioRID. We found that cervical vertebral motions differ markedly according to the difference in impact loading condition. Some particular characteristics are also found, such as the flexion or extension of the upper cervical vertebrae (C0, C1, and C2) or middle cervical vertebrae (C3-C4), showing that the modes of cervical vertebral motions are markedly different among the different loading conditions. We also found that the biofidelity of dummies to neck response characteristics of the volunteers at the low-level impact loads is in the order of BioRID, THOR, and HY-III. It is relevant in this regard that the BioRID dummy was designed for a low-severity impact environment, whereas THOR and HY-III were optimized for higher-severity impacts.     

新型封孔材料的性能研究及封孔长度计算

研究聚氨酯硬泡材料的渗透性能和粘结性能,旨在为煤矿瓦斯抽放和煤层注水工艺提供本质安全型的封孔材料,从而提高瓦斯抽放和煤层注水的效果,做好瓦斯、煤尘灾害的预防工作。根据达西定律设计材料渗流量的测试实验,将测定的数据进行线性拟合后,得出聚氨酯硬泡材料的渗透系数为1.00546×10-6cm/s;通过材料的抗压剪切力测试,得出聚氨酯硬泡与煤的粘结强度为387.95kPa;根据封孔模拟实验结果,选择压注药液法作为封孔方法,并根据钻孔受力平衡原则,计算得出由聚氨酯硬泡作为封孔材料的封孔长度至少为0.967m。     

Evaluation of military helmets and roof padding on head injury potential from vertical impacts

Objective: Soldiers in military vehicles subjected to underbelly blasts can sustain traumatic head and neck injuries due to a head impact with the roof. The severity of head and neck trauma can be influenced by the amount of head clearance available to the occupant as well as factors such as wearing a military helmet or the presence of padding on the interior roof. The aim of the current study was to examine the interaction between a Hybrid III headform, the helmet system, and the interior roof of the vehicle under vertical loading.

Methods: Using a head impact machine and a Hybrid III headform, tests were conducted on a rigid steel plate in a number of different configurations and velocities to assess helmet shell and padding performance, to evaluate different vehicle roof padding materials, and to determine the relative injury mitigating contributions of both the helmet and the roof padding. The resultant translational head acceleration was measured and the head injury criterion (HIC) was calculated for each impact.

Results: For impacts with a helmeted headform hitting the steel plate only, which represented a common scenario in an underbelly blast event, velocities of ≤6 m/s resulted in HIC values below the FMVSS 201U threshold of 1,000, and a velocity of 7 m/s resulted in HIC values well over the threshold. Roof padding was found to reduce the peak translational head acceleration and the HIC, with rigid IMPAXX foams performing better than semirigid ethylene vinyl acetate (EVA) foam. However, the head injury potential was reduced considerably more by wearing a helmet than by the addition of roof padding.

Conclusions: The results of this study provide initial quantitative findings that provide a better understanding of helmet–roof interactions in vertical impacts and the contributions of the military helmet and roof padding to mitigating head injury potential. Findings from this study will be used to inform further testing with the future aim of developing a new minimum head clearance standard for occupants of light armored vehicles.     

隧道受限火灾合理纵向通风风速范围研究*

为探究公路隧道不同受限程度火灾的适宜纵向通风风速,基于FDS模拟分析5种纵向通风速度下不同近壁距离火源顶棚下方烟气最高温度的分布特性、烟羽流倾角及烟气分层状况,提出合理纵向通风风速范围。研究结果表明:在隧道中心线上近火源下游,顶棚下方的最高温度沿纵向均呈指数衰减。不同贴壁距离和纵向通风风速下,均出现烟气分岔流动,随着贴壁距离减小羽流撞击处温升、火羽流偏移角显著增加。当风速小于1.6 m/s时,火源上游出现大量高温烟气回流;而当风速超过2.4 m/s时,分岔流动现象越明显,各偏移角变小,火源下游逐渐后移的烟气层严重失稳。因此,不同受限程度下火灾合理纵向风速为1.6~2.4 m/s。     

Cervical spine loads and intervertebral motions during whiplash

OBJECTIVE: To quantify the dynamic loads and intervertebral motions throughout the cervical spine during simulated rear impacts. METHODS: Using a biofidelic whole cervical spine model with muscle force replication and surrogate head and bench-top mini-sled, impacts were simulated at 3.5, 5, 6.5, and 8 g horizontal accelerations of the T1 vertebra. Inverse dynamics was used to calculate the dynamic cervical spine loads at the centers of mass of the head and vertebrae (C1-T1). The average peak loads and intervertebral motions were statistically compared (P < 0.05) throughout the cervical spine. RESULTS: Load and motion peaks generally increased with increasing impact acceleration. The average extension moment peaks at the lower cervical spine, reaching 40.7 Nm at C7-T1, significantly exceeded the moment peaks at the upper and middle cervical spine. The highest average axial tension peak of 276.9 N was observed at the head, significantly greater than at C4 through T1. The average axial compression peaks, reaching 223.2 N at C5, were significantly greater at C4 through T1, as compared to head-C1. The highest average posterior shear force peak of 269.5 N was observed at T1. CONCLUSION: During whiplash, the cervical spine is subjected to not only bending moments, but also axial and shear forces. These combined loads caused both intervertebral rotations and translations.